GIS & Research @ Outdoor Alliance

Block user


Added 4 photos to Buysell
Aug 26, 2019 at 14:20
Aug 26, 2019
Aug 26, 2019 at 14:19
Aug 26, 2019

Transition Patrol (carbon)

$3950 USD
Built from the frame up, this bike has been well maintained and taken care of. Frame was wrapped with 3M protective tape before being built, and is in excellent shape. The bike comes with i9's new hydra hubs laced to enduro 305 rims, and Sram Code RSC stoppers with 200 mm rotors front and rear (I can include 180 mm rear if requested). More details on the bike build below. Fork and shock were recently serviced in July. All bearings were recently checked and packed in July. Bike kit options: Complete bike: $3,950 (includes shipping) Frame, fork, and wheels: $2,750 Frame and Fork: $2,150 Will accept payments via Paypal. Shipping is included with cost via Bike Flights. 2019 Transition Patrol bike build: Fork: Fox Performance Elite, 170 mm, FIT GRIP2 damper Shock: Fox DPX2 Performance Elite, 160 mm Headset: Cane Creek 110 series Stem: PNW Components, Range Stem, 30 mm Handlebar: Renthal Fatbar Carbon, 31.8 mm Grips: ODI Elite Pro Saddle: ANVL Forge Saddle Seatpost: 9.8 Fall Line, 175 mm Brakes: SRAM Code RSC Rotors: SRAM Centerline 200mm (front and rear) Shifter: SRAM XX1 Eagle 12 spd Derailleur: SRAM XX1 Eagle 12 spd Cassette: SRAM Eagle 10-50, 12 spd Chain: SRAM XX1 Eagle Crank: Raceface SixC, 165 mm, 32t chainring Wheelset: i9 Enduro 305, boost Tire front: Maxxis Assegai (27.5 x 2.5) Tire rear: Maxxis Minion DHF (27.5 x 2.5) Weight: 31.50 lbs

levi-rose RichardCunningham's article
Apr 27, 2019 at 11:10
Apr 27, 2019
Added 3 photos to Buysell
Mar 20, 2019 at 23:25
Mar 20, 2019
Mar 20, 2019 at 23:25
Mar 20, 2019

XX1 Eagle Crankset - Brand new in box

$315 USD
SRAM XX1 Eagle Crankset, brand new in box, unused. *170 mm crank arm length. *Boost spacing. *Includes 32T chainring. *Compatible with GXP Bottom Bracket (not DUB).

Added 5 photos to Industry-Nine
Nov 4, 2017 at 7:01
Nov 4, 2017
Nov 4, 2017 at 6:59
Nov 4, 2017

Industry Nine Enduro 305 ($$ drop)

$750 USD
Wheelset history: purchased wheelset new in May 2017 (5 months use). I recently purchased a new bike with boost standards (the reason I'm selling these wheels). Brand new rear rim was laced on 11/1/17, and will remain new/unused. Rear hub was serviced by i9 on 11/1/17. Front wheel is in excellent shape, with just a few scratches. I have a good selling history on Pinkbike, check out my profile for more information. Specs: Rear wheel: axle 142mm x 12mm, driver SRAM XD, inner rim width 30.5mm, outer rim width 34.1mm, weight 910g Front wheel: axle 100mmx 15mm, inner rim width 30.5mm, outer rim width 34.1mm, weight 790g Buyer pays shipping. Estimated shipping cost plus insurance approximately $31 (depends on shipping distance from Asheville, NC)

Added 9 photos to Kona-Process-153
Jul 31, 2017 at 20:22
Jul 31, 2017
Jul 31, 2017 at 18:28
Jul 31, 2017

Kona Process 153 DL with extras ($$$ drop)

$2700 USD
Bike History: Purchased 2017 Kona Process 153 DL new in October 2016. Bike was wrapped with clear 3m protective tape in high wear areas before riding (chainstays, crank arms, etc.). Recently pivots were checked, packed and replaced as needed. New enduro max bearings were installed in the upper and lower main pivots on 10/20/17. New 32T chainring and 11x chain were installed on 10/20/17. Bike is ready for shredding. I have a good selling history on Pinkbike, check out my profile for more information. Also willing to sell bike for $2400 without dropper seat post. A few options to consider if you would like upgraded parts included with the bike. i9 Enduro 305 Wheelset (120 point engagement, 30.5mm inner width // 34.1mm outer width), $900.00 Fall Line 175 mm Dropper Seatpost, includes Wolf Tooth remote trigger with matchmaker, $400 MRP Ramp Control Cartridge, $100 Brand new chainstays, $300 Renthal Fatbar Carbon Bars, $100 Renthal Duo Stem, $50 Upgrades: new parts added to the bike and included with the purchase: Cane Creek 110 Headset OneUp S3/E-Type Chainguide (upper guide direct mount) Stock Components on Deluxe Build Kit: RockShox Monarch Plus RC3 rear shock RockShox Lyrik RCT3 Solo Air 160mm Tapered fork SRAM X1 1200 cranks 30t X-Sync chainring SRAM GXP PF92 bottom bracket SRAM PC 1130 chain SRAM XO1 rear derailleur SRAM X1 shifters SRAM Guide RSC brakes WTB Asym i35 TCS Wheelset 200 mm front rotor 180 mm rear rotor Kona 35 handlebar Kona 35 stem ODI Ruffian MX grips (unused) KS Lev Integra 150mm dropper post WTB Volt Pro saddle Maxxis Minion DHF EXO 3C 27.5 x 2.5" front tire Maxxis Minion DHF DD 27.5 x 2.5" rear tire Purchased new: $4,599 Upgraded parts: $172 Total: $4771 Priced to sell: $2,700 Buyer pays shipping. Previous shipping cost of complete bikes are approx $235 (depends on shipping distance from Asheville, NC, plus insurance (UPS charges $0.90 for every $100, approx. $35)

Added 1 photo to YT-First-Love
Jan 17, 2017 at 8:16
Jan 17, 2017
0 comments – Add comment
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.027931
Mobile Version of Website