liammarsh5426

Up for grabs is my awesome single speed commuter / cyclocross bike. Built with no expense spared anywhere... Bike cost well over £1000 to build. The bike has been ridden as my daily commute ride and has covered approx 1400 miles bike benifits from just having a new bottom bracket and chain fitted after the harsh winter and has a selection of rear cogs to tune to your perfect ratio. Bike spec as follows: Transition Rapture 2015 frame and forkset. Hope headset at current running 1 1/8 steerer forks but will accept external 1.5 for tapered forks like kinesis and enves. Currently run in single speed configuration but has dual gear hanger for traditional derailleur systems. Mavic Xm719 welded not cheaper pinned rims on a rear dt swiss 340 disc hub and front shimano xt disc hub. Set with continental gatorskin 700x 28c tyres and a pair of schwalbe cx pro cross tyres for those muddy days :) TRP HYLEX full hydraulic disc brakes with recent pads and 160mm rotors front rt86 icetec and rear rt66 SLX. Bike is currently single speed mode but TRP have released a Di2 kit for these brakes so you can keep them and gears :) Shimano XT crank with praxis works forged single speed chain ring solid with only a little wear. Deda bar and stem set wrapped in fabric bar tape. Im sure ive missed bits out but any questions ask im quite sure there is not many of these cool little bikes in the country. For more info check out www.transitionbikes.com