lostbikes

Grab your wallet and pick up the phone! Now is the time to buy this one-of-a-kind, sick-AF, self-shuttle shred machine... Starting off with 2023 Kenevo SL carbon frame in S3, with 250W motor and 320Wh battery, things only get better! Next up is the mullet We Are One wheelset, with everybody's favorite Onyx Vesper sprag clutch equipped hubs, and WAOs Triad rims, and CushCore inserts (XC front/standard rear) Suspension is handled by a RockShox Boxxer World Cup up front and a Super Deluxe Ultimate rear. RockShox Reverb AXS 150mm dropper and GX AXS make for a (mostly) cable free cockpit setup. Will include the two batteries and a spare, plus charger. Brakes are the tried and true SRAM Code Rs, nothing flashy, just built to get the job done. I will include two sets of brand new spare pads as well. Total weight right now (including dirt and twigs) is 44.2lbs, I built this bike to ride steep and deep PNW trails but have since relocated to the desert and trails here are... different... so I've decided to sell the eeb and replace it with a meat motor. Purchased 4/24, this bike has 650 miles on it. Parts were spec'd for long term reliability and durability but its not perfect... The GX derailleur is suffering from the intermittent fault due to the pogo-pins, a common issue with AXS derailleurs. This issue is actually so common that I have a spare and will include it in this deal so you can have one on the bench for repairs, and be out riding with the other! I'm including a bag of replacement pins so you just need to buy yourself a soldering iron and get after it! The front hub bearings are also a bit worn, you can feel some slop when unweighting the bike in a parking lot, on the trail it is not noticeable. It has had protective wrap from day-1 so its in pretty good shape, but it is dirty and does have a few scuffs. Basically I'm too lazy to fix these nagging issues-I would rather go out riding than sit at home and polish up a bike I'm about to sell-so I'm going to give you a sweet-sweet discount, and all you have to do it invest in a bucket of soapy water and a sponge to get the genie out of this lamp! Asking $3300 OBO, buyer pays shipping Handguards and fender are only included at full asking price!

Hayes Domion A4 brake set in gunmetal (sorry, no purple!) with sintered metallic pads and 203mm Hayes rotors These came spec on my bike, and I rode them on two occasions while I was waiting for my preferred brake choice to arrive. You can see the pads are at full thickness and there is a faint pad material transfer layer beginning to appear on the rotors. The rear line was internally routed so it has been cut for removal but I am including a pack of replacement hardware. I didn't reassemble and bleed it in case you want to route it internally in which case youd have to cut it and replace the hardware again... TLDR; It will require reassembly and a bleed once installed on your new rig. Front hose is 35", rear is 54" Aside from some minor use these are brand new brakes, asking $325 USD, including shipping!