lunker8

Selling my Banshee Prime. It is a Size XL which measured at 495mm reach stock. with it setup mullet I believe it's around 487~ reach. Would Recommend for a rider 6 foot and up. The Frame, Fork, Rear Shock and crank/chainring are used. Everything else is brand new just taken off my new ride. It is currently set up mullet but the flip chip located at the rear dropouts does allow for full 29 or mullet compatibility. Specs are as follow: Frame: Banshee prime V3 XL Fork: Marzocchi Z1 150mm, 44 offset, 15mm QR. Lower leg service just done Shock: Fox DPX2 Performance Elite. Airman service just done Crank: Raceface Turbine 175mm Chainring: Blackspire snaggletooth 30t oval ring All Parts listed below are brand new Never used Wheels: Crankbrothers Synthesis Enduro alloy, 27.5 Rear, 29 Front Front Tire: Michelin Wild AM2 29x2.4 Rear Tire: Michelin Force AM2 27.5x2.4 Bar: Burgtec Wideride Alloy 800mm wide 30mm rise Stem: Burgtec MK3 Enduro 35mmx42.5mm Grips: ODI Vans lock on Dropper remote: Oneup V2 MMX Seatpost: Oneup V2 180mm Saddle: Fizik Terra Alpaca X5 Brakes: Sram Code Silver (same as RSC but with "stealth" levers) contact and reach adjustment Rotors: Sram Centreline 180mm Chain: Sram GX eagle Derailleur: Sram GX eagle B2 Cassette: Sram GX eagle 10-52 Bottom Bracket: Raceface BSA Cinch shell is used but bearings are brand new Bash: Oneup Bashguide Can include a pair of Maxxis tires, 70% Life Minion DHF for the front and 50% life Highroller 2 for the rear Happy to ship across Canada at buyers expense. Pedals Not Included!