madadam

100mm travel 30.9mm diameter 400mm total length Cable can be run internally or externally. Post in great condition, it came on a bike that I bought last year, but I switched it for one with less setback at the beginning of 2015. Has been in the closet since, but I just took it apart and relubed the internals. The only thing wrong with it is that a little bit of the coiled housing that goes between the lever and the barrel adjuster is stretched, but it could easily be cut back or replaced. Comes with everything pictured.

Sun Ringle Inferno 25 650B 27.5 wheels on SLX hubs 15mm thru-axle front 142x12 rear Shimano SLX centerlock hubs front and rear. They came as spares with a used bike I bought (2014 Rocky Mountain Altitude 950). The original owner took them for one ride and swapped them out, and I haven’t used them, so they’re spotless. They run true, and spin nicely. Rim strips included, they’ve only ever had tubes in them. Internal width is 20mm. Weights with rim strips: Front: 925g Rear: 1060g I’d prefer to sell them together. I might consider separating them, but only if it’s a local sale. For shipping quotes, go to: https://www.canadapost.ca/cpotools/apps/far/business/findARate?execution=e1s1 From postal code is: T2T 0A1 Dimensions of the box are 68 x 18 x 66 cm, weight is 6kg Regular parcel is going to be the reasonably priced one.

Sun Rims MTX 34 on Atomlab 20mm hub. Selling as it has been sitting in my attic for a while. Runs true. Has some scratches but no dings or flatspots. Handbuilt at Phat Moose Cycles.

Truvativ Hammerschmidt FR crankset in good condition 175mm crank length Truvativ Howitzer 68/73mm BB Compatible with ISCG 03 and ISCG 05 SRAM X9 shifter 24T front ring, equivalent to 38.4T when in overdrive. Includes everything pictured. Works really well and shows no signs of wear to the internals. Bought used last season, but now I’m selling the bike it was mounted on. Tech manual: http://www.sram.com/_media/pdf/truvativ/dealers/HammerSchmidt-Tech-Manual-English.pdf Let me know if you have any questions.

Great bike that I’ll be sad to see go, but I’m moving and it’s time for a new one. Frame: 2006 Specialized Enduro Elite w/ Fox DHX 5.0 (Medium), 150mm travel Fork: Marzocchi Z150 FR (travel can be lowered and rebound adjusted), 150mm travel Front Wheel: Azonic Outlaw Rim and hub (20mm) Rear wheel: Sun SOS 32 on Shimano Deore hub Tires: Schwalbe Hans Dampf 2.3” (practically brand new), run tubeless with Stan’s Notubes rim strips and sealant Brakes: Avid Juicy 7 with Goodridge braided SS lines, 200mm Shimano rotor front, 160mm Shimano rotor rear Cranks: Shimano Deore 22/34 with Ethirteen bash guard Pedals: Azonic A frame Shifters: Shimano Deore Front Derailleur: Shimano LX Rear Derailleur: Shimano XT Cassette: Shimano XT Headset: Aheadset Stem: Dangerboy AK 47 (47mm long) Handlebar: Chromag Fubars OSX Grips: ODI Ruffian (not pictured) Seatpost: Crank Brothers Joplin 80mm dropper (will also include the stock Specialized rigid post) Seat: THE It will come with grips and the correct number of headset spacers. It will also come with the shock pump adapter for the fork and shock shuttle for adjustable geometry. Geometry and sizing can be found here: http://service.specialized.com/collateral/ownersguide/new/assets/pdf/FSR---2006-Enduro-FSR-Manual.pdf I just did a once over check/tune of everything, ran new shifter cables and changed the fork oil. Everything works well and is in good condition. The only problem that I can think of is that the rebound adjuster on the fork doesn’t always engage, so it can be a bit finicky. Let me know if you have any questions or want specific pictures.

2002 Chumba Wumba F4 with parts Clearing out the attic… Bought it in 2006, ridden lightly until about 2010, then cannibilized some parts and it never got put back together. This bike was ahead of its time, things like the 9.5”x3.0” shock and slack head angle (for the time) give it away. It was a great bike, loved it. 8.5” of travel via 9.5”x3.0” Romic shock (has rebound adjust) Size: Medium (There were only 2 sizes offered, this is the smaller of the two.) Has floating brake with weird brake mount, but I figured out some adapters to get a normal IS mount brake to fit (last had a Avid Juicy 7 on it). Only things wrong with it are the rough looking powder coat, a small dent under the BB, and a small amount of play in the linkage (can feel it when you pick up the bike by the seat, but not while riding). Included with the frame: Rear wheel: Mavic EN321 on Azonic hub with 24 engagement points. The hub is special to work with the floating brake mount. The rim has a few small dents and needs a mild truing. Chainguide: E13 with bashguard Cranks: Raceface Prodigy DH 175mm with Raceface 83mm BB Seatpost: Titec Seat: Titec El Norton Headset: FSA PIG DH Pro sealed Brake: Hayes Mag with funky mount (will post photo tomorrow) If you also need a front wheel from the same period, I have a Sun MTX 34 on Atomlab hub that is also for sale, see my other items. I would make you a deal if you wanted it as well as the frame kit. Let me know if you have any questions or want specific pictures.