mattyb94

I’m selling my 2015 YT Industries Tues AL Comp due to lack of use. The bike is a medium and has been well maintained and has seen very little trail use. I used it mainly the summer of 2015 when I first got it and at the start of 2016 then I started some exams for work and didn't have the time to use it. Other than that this, it has mainly been used for rides along the coast on the flat for exercise and because of this I have to put it up for sale as it wasn’t viable to use such a good bike for those types of rides so I have bought something more appropriate. The bike is extremely fun and feels very smooth and well built. The bike has never been used on any uplifts or had any hard use. It has had 3M mastic tape protecting the chain stay since day 1 and bike tape protecting the areas where cable rub would otherwise occur. There a few scratches here and there due to general use, I have photographed the main mark on the brake lever/bar area. It has a new rear tyre, new chain and new brake pads which have all seen around 25 miles of use on tarmac. I have a spare hanger and the manuals for all of the parts on the bike too. Specs are as follows: Frame: TUES Aluminium 27,5”( V4L rear suspension system, 150 x 12 mm axle, down tube protection) Shock: RockShox Vivid R2C (267 x 89 mm) Fork: RockShox BoXXer Team Travel f/r: 200mm/208mm Headset: ACROS AZX-205 Rear Derailleur: SRAM X9 Typ 2.1 Shifter: Sram X9 Chain Guide: e*thirteen LG1+ (EXA+ aluminum carrier plate, DMB drive guard, fitting standard ISCG 05) Brakes: SRAM Guide RS Disks: SRAM Centerline Cranks: SRAM Truvavit Descendant (165mm length) Chainring: SRAM Truvativ Descendant (36t) Cassette: SRAM PG 1050 (11-28t) Bottom Bracket: SRAM GXP (PF30 / 83mm) Wheels: DT Swiss YT2020 27,5 (FW 20 / 110 mm, RW 12 / 150 mm) Front tyre: Maxxis High Roller II ST (SuperTacky) Rear tyre: Maxxis High Roller II MaxxPro Stem: Race Face Atlas DM 35 (length 50 mm, rise 0 mm) Handlebar: Race Face Atlas 35 800 (rise 35 mm, length 800 mm, clamp 35 mm) Grips: Sensus Disisdaboss Seatpost: SDG Micro I-Beam (outside-diameter 30.9 mm, length 300 mm) Saddle: SDG I-Fly YT (rails for I-Beam) Pedals: Nukeproof Electron Evo Pedals Weight: 17,5 kg / 38,6 lb Collection preferred, but would consider posting at the buyers expense. Looking for £1400 ONO

This is my YT Industries Tues (2010) in frame size small. The bike runs very smooth and has been well looked after and maintained. The spec of the bike is as follows: Forks: Rock Shox Boxxer Team Shock: Rock Shox Vivid 5.1 Brakes: Avid Elixir CR (Rear has braided hose) Rear Derailleur: SRAM X9 Shifter: SRAM X9 Chain Guide: Gamut P30 Cranks: Truvativ Hussefelt 1.1 Cassette: Sram PG 950 - 9 Speed - 11-32 (New one fitted end of January 2015) Chain: SRAM PC971 (New one fitted end of January 2015) Chainring: Renthal SR4 Ultralite Alloy Chainring (36T) Bottom Bracket: Truvativ Howitzer Team (New one fitted mid 2014) Rims: Sun Ringle MTX 33 Front Hub: Division FHB light - 20mm Thru Axle Rear Hub: Division RHS light - 12mm Thru Axle Tires: Kenda Nevegal 2.50 Stick-E Stem: Truvativ Hussefelt Handlebar: Truvativ Boobar Seatpost: Truvativ Hussefelt Seat: Charge Spoon Pedals: Dvision Grips: Octane One Bolt-On Long Grips Headset: YT Taper The bike has the normal wear and tear marks that a mountain bike is going to get when used. Most obvious marks include the bottom of one side of the forks from using on a bike rack, rims flaking in places, cable rub marks. The wheels are running true, gears are smooth and the brakes are also working great. New frame bearings were fitted just over a year ago and it has been regularly greased. Looking for £1050 or best offer. I have a bike box that can be used to post the bike at the buyers expense. If you have any questions or would like to arrange to view the bike please let me know.