mmoon

The Process 153 DL is the master of burl when it comes to Kona’s Process line. The versatility of 27.5-inch wheels allows for exceptional pedal efficiency and control, while 153mm of Rocker Independent Suspension and a 160mm Aion fork keep you pinned on the descents. Size: Large Wheel Size: 27.5” Frame: 2015 Kona Process 153 DL Shock: Fox Float X, Factory, EvoL Fork: 160mm SR Suntour Aion 15x100TA Brake Levers: SRAM Elixir Brake Calipers: SRAM Guide Brake Rotors: 200/180mm (8”/7”) Front/Rear Cranks: SRAM X1 1200 with RaceFace Direct-mount Narrow-wide Chainring Drivetrain: SRAM Eagle 12 speed Hubs: Hope Pro 2 Evo Rims: Stans Flow EX Tires: Maxxis Minion Dhf 27.5X2.3 Exo/TR Front, Maxxis High Roller II 27.5x2.3 Rear Handlebar: PRO Alloy Riser, 31.8mm, 800mm x 20mm Stem: Gravity, 45mm length Grips: New SDG Lock-On Headset: FSA Orbit 1.5 ZS No.57 Seat: WTB Volt Seatpost: Thompson Elite Located at SFU/Burnaby Mountain

2017 Demo 8 Alloy size XL. Custom cedar shingle vinyl wrap, vinyl can be removed and it’s yellow/orange underneath. Boxxer team w/ blue spring. Oil in lowers just changed. I have a red and yellow spring too if needed. Fox DHX5.0 rear shock with titanium spring (or if it’s the wrong weight I probably have the correct weight steel spring) Maxxis Minion DHF and HighRoller tires. New Shimano 4pot brakes with finned pads and Hope floating rotors. XO dh crank set Chromag Fubar w/ new grips Sram GX 7 speed drive train with narrow wide direct mount chain ring. I ran the bike single speed so the drivetrain has seen little use. Hope pro 4 DH wheelset. Located at Burnaby Mountain, SFU, but I also ride often in Maple Ridge and can meet out there as needed.