mooseindahouse

Purchased in September directly from Fanatik Bike. Stock factory tune (did not come off another bike) I ran it on my Raaw Madonna for a couple rides, but I just prefer the stock Float X. 205 x 65 trunnion Shipping included to lower 48

Less than 100 miles of use. Nothing wrong whatsoever I just went a different direction. Each lever/ caliper is scratch free. I’m also including the Galfer Shark rotors I was using these with. These rotors retail for $100 each and are amazing over the centerline or HS2 in terms of performance. Each rotor is 180mm and has 1.8mm thickness and they are about 32 grams lighter than the sram HS2 rotors. This is a great light setup. The pads are metallic and have a ton of life left. Front hose length 32.5 inches Rear hose length 57.5 inches The brakes were installed on a medium tall boy for reference Shipping included to the lower 48

Used on a handful of rides this summer. I’m also selling the matching Title carbon bars for this if you want a deal on both. Diameter 35mm 46mm length Please add $10 for shipping in lower 48

These came on my bike but I ended up going with something taller. These have 3 rides on them. 35mm diameter 25mm rise 760mm wide (cut down from 800mm) Please add $15 for shipping in lower 48

Used for a few months this year before parting out the bike it was on. No issues or damage to speak of. 35mm bar diameter 42mm length 150 grams Please add $10 for shipping

Set of 165 length XO cranks with the XO 32t chainring and bash guard. Used on one of my 3 pedal bikes this year so mileage is relatively low. Standard dub wide and 3mm offset for 55CL Please add $10 for shipping

Purchased in January and ridden between two other bikes of mine. The miles are low considering it’s 8 months old. I’m only selling because if you look at my buy/ sell history you’ll see I swap bikes every 6 months or so and I bought a Raaw Madonna off a friend for a really good deal. There’s nothing wrong with this bike whatsoever. There are very few imperfections on the frame with really only some minor heel rub on the non drive side chainstay. The fork and shock are in great working condition, the brakes have a great bleed, the drivetrain has many more miles to go. I haven’t registered the bike and would be more than happy to send the original receipt upon purchase. This is a medium so it is MX wheel. Spec: 2026 Revel Ritual Medium 2026 Fox Factory X2 2026 Fox Factory 38 SRAM Maven Silver B1 Levers Roval Traverse Carbon wheels (HD rear, SL front) DT 350 hubs 36t ratchet Specialized Gravity Radials Butcher front and Eliminator rear Eagle 90 shifter / derailleur/ cassette SRAM X0 ttype 170mm cranks One up V3 180mm post / shifter SDG bel air V3 saddle Raceface turbine alloy bars 780mm Specialized 42mm stem Please add $50 for shipping in lower 48

These were used on my 5010 that I parted out. They’ve been ridden , but not abused. Bearings are still great and the wheels are true. There is one small flat spot on the rear (pic included) no issues holding air. DT 350 hubs with 36t ratchet SRAM XD driver 6 bolt Fillmore valves and rim tape included Please add $25 for shipping in lower 48.

I bought this 5010 back in November from a lady who rode it maybe 3 times. Since November it has been one of my 4 bikes so it really hasn’t been ridden much. It’s been ride wrapped since day one. There is only one blemish on the bike and it’s on the non drive side seat stay. Just cosmetic, no issues with the carbon and I’ve included a close up image. Rockshox Super Deluxe Ultimate Headset included Santa Cruz glove box bag included Please add $50 for shipping in lower 48 I’m also selling a Fox 36 SL that was used on this frame if you’re interested we can work out a deal for both.

Used for only a handful of rides on one of my bikes. No scratches or blems. Only selling because I’m parting out the 5010 it was installed on. 140mm travel 44mm rake 6 and 7/8 inch steerer Grip X damper Please add $25 for shipping in lower 48