Pinkbike.com
Powered by Outside
mrranderson
- Member since Nov 18, 2013
- O+
-
Calgary , Alberta - 1 Followers
- 73 Trailforks Points
Recent
Selling
Jul 1, 2026 at 17:21
Jul 1, 2026Norco Range VLT C1 - Size 4
$6444 CADSize 4
Priced to sell & RTG ! $6444 FIRM > best value & lowest ask on PB !!
Original Owner, purchased & maintained with same local YYC bike shop. Complete S&M history available.
Bought new in April 2024- 80 ride days total (less than 60 battery charge cycles Bosch diagnostic can confirm)
Stock Spec EXCEPT : 223mm SRAM HS2 rear rotor
Full Tune & Service.
Fresh serviced RS Vivid Select+ Rear shock. Front Fork Lowers Serviced July 2025 (500km)
Brand New F & R Tires : Continental Kryptotal Soft Enduro 29 x 2.4, 27.5 x 2.4
New SRAM NX Chain (500km/ 0.25 wear), New AXS Drivetrain & Rear Cassette (500km)
REAR brake pads (500km) + 1 extra bike park pad set.
Ride Wrap Basic + addtional DIY 3M Frame Protection.
Handle bar is original OEM - brand new and uncut *(800mm)
*used PNW 38mm Rise Bar incl (770mm)
Has current Bosch CX-4 software updates.
Including *overrun E-MTB+ & 400% assistance performance upgrade
54#s as is.
If you’re into trail riding & trail centers I WILL NOT SELL YOU THIS BIKE !
If you are in to anything steep, mega tech up AND down, any gnarly fast down hills or alike jump lines ~ This is the machine you want !
The Norco Ride Aligned suspension set up dashboard is the best in the business.... add your inputs, set it and forget it !
This is a legitimate heavy hitter for enduro, alpine & jump line rides. Enduro / DH designed geometry, excellent durability, over all 1 of the best value enduro emtb's on the market.
*As a 200+# kitted rider I had many 1500m + vertical climb days NOT USING ECO MODE
Loam Wolf Voted Range VLT C1 Best E-MTB DH/ Best Buy in August 2024
NSMB 2 x reviewed the C1 as a legitimate North Shore and Whistler all arounder
VLT C-1 Weblinks:
https://www.norco.com/bikes/e-mountain/e-enduro/range-vlt/2024-range-vlt-c1/
https://theloamwolf.com/emtb/review-norco-range-vlt-c1-2/
https://nsmb.com/articles/2025-norco-range-vlt-c1/
https://nsmb.com/articles/2024-norco-range-c1-vlt-emtb/
IF you are going to offer LESS THAN ASK ensure to provide a weblink of an alike for-sale listing so we can negotiate on a high level... TY.
FOB NW Calgary.
Selling
May 22, 2026 at 9:01
May 22, 2026
mrranderson stephanepelletier's article
Mar 21, 2026 at 9:54
Mar 21, 2026
Knolly Bikes Enters Receivership & Evaluates Restructuring
Well said. Financial institution profits are completely irrelevant to Knollys rebuttal - circumstance. Increased leverage / debt levels vs revenue (s) are simply ratio calculations specific to each industry not an individual business. Knolly s CFO would have known these specific covenant thresholds that would have been required to keep the banks risk analysis in the "green". Definitely a poor choice of words to shift some blame to their bank.
Selling
Mar 11, 2026 at 12:13
Mar 11, 2026Norco Range VLT C1 - Size 4
$6444 CADSize 4
Priced to sell & RTG ! $6444 FIRM > best value & lowest ask on PB !!
Original Owner, purchased & maintained with same local YYC bike shop. Complete S&M history available.
Bought new in April 2024- 80 ride days total (less than 60 battery charge cycles Bosch diagnostic can confirm)
Stock Spec EXCEPT : 223mm SRAM HS2 rear rotor
Full Tune & Service.
Fresh serviced RS Vivid Select+ Rear shock. Front Fork Lowers Serviced July 2025 (500km)
Brand New F & R Tires : Continental Kryptotal Soft Enduro 29 x 2.4, 27.5 x 2.4
New SRAM NX Chain (500km/ 0.25 wear), New AXS Drivetrain & Rear Cassette (500km)
REAR brake pads (500km) + 1 extra bike park pad set.
Ride Wrap Basic + addtional DIY 3M Frame Protection.
Handle bar is original OEM - brand new and uncut *(800mm)
*used PNW 38mm Rise Bar incl (770mm)
Has current Bosch CX-4 software updates.
Including *overrun E-MTB+ & 400% assistance performance upgrade
54#s as is.
If you’re into trail riding & trail centers I WILL NOT SELL YOU THIS BIKE !
If you are in to anything steep, mega tech up AND down, any gnarly fast down hills or alike jump lines ~ This is the machine you want !
The Norco Ride Aligned suspension set up dashboard is the best in the business.... add your inputs, set it and forget it !
This is a legitimate heavy hitter for enduro, alpine & jump line rides. Enduro / DH designed geometry, excellent durability, over all 1 of the best value enduro emtb's on the market.
*As a 200+# kitted rider I had many 1500m + vertical climb days NOT USING ECO MODE
Loam Wolf Voted Range VLT C1 Best E-MTB DH/ Best Buy in August 2024
NSMB 2 x reviewed the C1 as a legitimate North Shore and Whistler all arounder
VLT C-1 Weblinks:
https://www.norco.com/bikes/e-mountain/e-enduro/range-vlt/2024-range-vlt-c1/
https://theloamwolf.com/emtb/review-norco-range-vlt-c1-2/
https://nsmb.com/articles/2025-norco-range-vlt-c1/
https://nsmb.com/articles/2024-norco-range-c1-vlt-emtb/
IF you are going to offer LESS THAN ASK ensure to provide a weblink of an alike for-sale listing so we can negotiate on a high level... TY.
FOB NW Calgary.
mrranderson jessie-mmorgan's article
Feb 21, 2026 at 8:18
Feb 21, 2026
Updated: YT Industries Reinstates Warranty Support in the US
Dear Key Board Cowboys
Have any of you clowns ever started and operated a business ? tsk tsk perhaps its time to move out of your parents basement !!
Kudos to Markus for stepping up in likely the most difficult business environments the bike industry (and many other sectors) has ever experienced.
mrranderson mattbeer's article
Nov 23, 2025 at 10:22
Nov 23, 2025
Opinion: The Ideal eMTB Should Have All of These Features
Since 2018 I ve owned 5 x e-mtbs, ride days at 525+ on enduro - tech type trails & > 13 000kms over 5 brands (Specialized, Focus, 2 x Norco, Orbea).
I am more than ecstatic how e mtb companies are evolving and progressing their product YOY - especially 2023 to present. Keep doing what your doing and maintain you engineering individuality.
I disagree with the authors comments on all the above mentions on required standards - the only standard I believe that absolutely should be enforced is MAX Class 1 motor torque and watts. IE: DJI numbers are not required IMHO... 750W 100nm is more than enough.
Just my thoughts.




