narddawg

2014 Santa Cruz Nomad V3 with a custom build. For those that care about weight, with Carbon wheels, the monarch plus shock, and single-ply tires, I had it built to ~28.5 pounds. In it's current incarnation, it's probably closer to 29.5. This bike is mechanically solid, but has chips and scratches commensurate with it's age, importantly no cracks. It is well maintained, but ridden. I've tried to picture wear marks as best I could, but feel free to ask for additional pictures. Frame: 2014 XL V3 Santa Cruz nomad in matte black, with (removeable) minty decals! Fit is probably closer to L by modern standards. Rear shock: CC DBair CS (I preferred the feel of this to the monarch that came on the bike) Fork: 2015 160mm Fox Float36 with RC2 damper (Scratch near the top of Left stanchion pictured) Brakes: SRAM guide RSC with brand new warranty levers (180mm rear, 200mm front rotor) Shifter: SRAM XX1 11spd R. Derailleur: SRAM XX1 11spd Cranks: SRAM XX1 with stainless 30T wolftooth dropstop ring (Should outlast the bike). Many rock strikes, but functionally fine. Cassette: SRAM XO1 10-42T 11spd Pedals: None Headset: Cane Creek 40 Stem: RaceFace Atlas (50mm) Handlebar: RaceFace Sixc (Cut to 790mm, scuffing near clamping areas) Seatpost: RockShox Reverb Stealth (150mm drop). Works, but has ~1/2" sag. Could probably use rebuild? Saddle: Ergon SME3 (Scuffed on left edge); Optional WTB Silverado in good shape if you prefer. Rear Wheel: DT Swiss 32H 142x12 240S laced to DT EX471; DT Comp spokes Front Wheel: DT Swiss 32H 20mm 240S OS laced to DT XM481; DT Comp spokes Tires: (F) Maxxis 2.4WT DHR2 Exo casing, (R) Maxxis 2.3 Agressor DD casing (both set up tubeless) Extras: RockShox monarch Plus rear shock (stock shock that probably needs a service, but still functional) -Specialized Butcher Control 2.3 (~60% life remaining) -15mm axle kit for fox 36 -15mm end caps for dt240 OS front hub -extra rubber chainstay guard (I used 3M mastic tape as i found it to stick better -Spare derailleur hanger (used, but I kept as a spare in my pack) -spider for xx1 crankset