nisommer

Lets start with the stats: 100-150mm of travel adjustable in 3mm increments Rebound, high speed compression, and low speed compression damping adjustments 8.125" cut steerer w/ star nut installed ISO disc tabs (faced) Just a hair over 5 lbs with axle I've been riding this fork for 4 seasons and its done nothing but good. I had the seals replaced two seasons ago, has never leaked oil. No blemishes/scratches/dings on the stanchions, super clean. I tried to show all of the minor scuffs acquired over the years in the photos. Everything is cosmetic. Only selling to get myself into a 32 (and the steerer doesn't fit my new frame!) Paypal preferred and I will even pay shipping. $300 shipped to your door! I want to sell quick, any interested parties lets make a deal! Contact through Pinkbike or email - nelsonsommerfeldt@mac.com

Fox DHX 3.0 - Spring, Rebound, Boost adjustments Size: 7.875" x 2.25" Springs: 500 lb and 250 lb (both steel) I took this off of a used Blur LT frame I just bought, don't need it, has to go to a new home. Bushings are solid, don't have any experience riding it but original owner claims it worked perfectly. Not looking to make big bucks on this one, just need it out of the house. Buyer pays shipping of $20 anywhere in US or CA. Paypal preferred. Message me to purchase.

**Price Reduced Again** **Great Deal, Must Go** This is your chance to get your hands on the biggest, baddest brakes ever made for mountain bikes. They look like they should be on a motorcycle, six titanium pistons pushing massive pads on 203mm rotors. Nothing will stop you faster than these, and they don't even produce them any more so this is one of the few chances to get a set! Not only are the brakes included but a whole lot of goodies to go with them, retail value of over $200 for all the extras. Here is a listing of everything: Hope Mono6 Ti disc brakes with Mini levers, 203mm rotors F and R, and ISO adaptors Two (2) sets of replacement stainless steel hoses with all of the hardware ($80 each) Three (3) sets of replacement brake pads ($16 each) Full package (2 meters) of Jagwire braided metallic silver cable housing with special ferrules (matches stainless brake lines, look awesome together) I've decided to sell these bad boys since I'm not doing massive downhills and I'd like to do a little weight savings. I'm a total brake junkie which is why I bought them in the first place. While it was awesome having these brakes, they belong on a bigger bike. After four years I still have the original pads in and they're only half gone! There are a few nicks and scratches on the calipers and levers from your usual riding, nothing that compromises the brakes. The reason I bought the replacement hoses is because the originals actually rusted (which I thought was odd). I was going to do them this winter but since I've decided to sell, you have the chance to custom fit them to your ride. That may sound like a cop out, but the stock hoses are super long so its actually pretty nice to have the option of a custom fit with brand new lines. I never had to bleed them and they've always been strong. I do have some DOT5 brake fluid I was going to use in the hose replacement I can toss in there too. If you have any questions please email me, I have lots more photos too I can send upon request. I would prefer to do this transaction with Paypal, but would also do a cashiers check. Please add $20 to the cost for shipping as well. Brand new M4's or V2's will cost you $600 so jump on the chance to get yourself even more brake for less cash. Thanks for looking.