okayfine

Set of three WTB 29x2.4 Ranger MTB tires. One mounted on a rim, but never ridden. $100 for all three shipped.

Near-new Onyx Classic MTB rear hub in Boost spacing/148 through-axle. Gold anno. Centerlock disc mounting. 32 spoke. Shimano HG freehub. Maybe 100 miles on it. Built by NOBL into their carbon rear rim, for use on our MTB tandem. Onxy cleared use on the tandem. In granny up steep hills, we'd feel the sprag clutch unlock/lock. That annoyed my happiness. All other terrains it was not noticeable, but where we ride you're either going up or down. Silent freehub. I rebuilt the rim with another hub, so have this spare.

This set of 29" Boost spacing rims were built by Co-Motion for our Java tandem build in 2018. We put ~400 miles on them before building a new set of lighter rims for our gravel tandem. Low miles, straight and true, ridden in US, Netherlands, and Germany. These are built to take loaded tandem touring, or spicy gravel for heavier teams. Velocity Cliffhanger rims 40 spokes, front and rear 6-bolt disc, no rim brakes 25mm inner width DT Swiss Champion 2.0 mm spokes Co-Motion branded hubs (most likely Andel) 1156g F 1268g R

Sold my Di2 mountain tandem, so now selling off my Di2 spares. -New-in-box XTR FD-M9050 3x front derailleur - $125 -New XTR FD-M9070 2x front derailleur - $125 -New XTR RD-M9050 rear derailleur - $200 -New-in-box XT SW-M8050 Left and Right shifters - $100 -Used Dura-Ace SM-EW90-A road Di2 computer and 3-port junction box - $60 With these parts, you just need a battery and appropriate Di2 cables for a complete electronic drivetrain. $600 for the entire listing above. Will sell separate, priced as indicated. Will ship the entire lot for free; buyer to pay shipping for individual items.

Ventana El Conquistador de Montanas all-mountain tandem. This tandem was built with S&S couplers, so this bike can be disassembled and packed for easy airplane flights to far-off trails. Ventana is a Made-In-California brand; we picked up this frame at the factory in Rancho Cordova in 2011. Since then, the entire bike has been maintained to a high standard and is ready to ride. Frame size is 17/16. See here for the frame geometry http://www.ventanausa.com/images/bike-list/2018-tandem-geometry-charts-rev1.pdf All S&S-coupled frames are made from chro-mo steel tubing. Spec: -Shimano XTR Di2 (all components) installed from new in 2020. Includes dual XTR shifters, XTR display, and XTR derailleurs. Will also include the Di2 system charger/laptop interface. -Chris King hubs on indestructible Sun MTX33 wheels, laced with Sapim Strong spokes. 20mm front axle, Chris King Fun Bolts bolt-on rear axle. -Middleburn tandem crankset, with 3x11 gearing -Shimano Ultegra 11-34 cassette (largest 5 cogs on spiders) -Cockpit is a mashup of Shimano and FSA bars, RaceFace stoker seatpost, and Thomson captain's seat post. Adjustable stoker bar positioning with the stoker stem. -Brakes are Hope Mono 6Ti, huge six-piston DH calipers with braided stainless brake lines. Freshly serviced in 2020 with new pads, caliper seals, and fluid. 203mm brake rotors. -Rear suspension is 4" travel with Fox RP23 Boost shock -Front suspension is currently Marzocchi dual-crown 66EVO with 38mm stanchions, 200mm travel. This is overkill, but with 200lb captain and 135lb stoker, given the trails we ride (mostly) around Newbury Park, it makes the bike much more capable. A lighter team could swap on a 100mm dirt jump fork, which can still be had in 26" sizes, and would vastly drop the standover heights F/R. Service history: I maintain our tandems in-house and just within the last year or so I have: -serviced the CK hubs completely (I have the CK hub service tool) -serviced the rear shock with new Fox air seal kit -installed one new bottom bracket -replaced the drive chain -serviced the brake calipers with new Hope seal kits and fluid flush, new rear pad install -installed new Shimano XTR Di2 drivetrain (shifters, display, cables, battery, front and rear derailleurs) This bike, because of Shimano Di2, doesn't need an "adjustment" for the shifting - no cables to change, get dirty, or stretch out. Bonus: If bought at asking price, I will include a huge supply of spares for this bike. Includes: -2 new Gigipipe DH ISIS bottom brackets -6 new pairs of brake pads -3 203mm brake rotors, 1 new Magura, 2 lightly used TRP -2 Middleburn sync rings, 32T -2 new RaceFace 42T chainrings -3 new 32T chainrings, 1 RaceFace, 2 Origin8 -1 new 22T chainring, titanium -6 new CST BFT 26x2.4" tires -2 new Maxxis Holy Roller 26x2.5" tires -1 used Marzocchi 66 180mm travel single-crown fork, serviced 1 year before removal Optional Builds: $3000 for the same bike and build, except Shimano XT 11sp mechanical shifting (shifters, derailleurs). $2000 for frame, fork, wheels Pedals not included, can provide flats for local test ride or bring your own. Current standover heights with 200mm fork: Captain 33.5", Stoker 31.5". We've had this for years and put lots of miles on it, and lots of smiles. The only reason it is up for sale is because we have a new frame on order from Ventana to build up!