pth88

Bike was purchased new in March of 2021. Pivot Trail X01 Enduro Build Battleship Grey Size: Medium Wheel Size: 29" Frame Material: Carbon Fiber Fork: 2021 FOX FLOAT 36 Factory, GRIP2 damper, 140mm, updated fork design Rear Shock: 2021 Fox DPX2 - D5D9 T429 Tune - This is the new updated shock design (much improved) Seatpost: 2021 FOX Transfer Factory dropper, 150mm, again updated design Dropper Lever: FOX Transfer Lever Shifters: SRAM Eagle AXS Controller Rear Derailleur: SRAM GX Eagle AXS Cranks: SRAM X01 Eagle DUB Carbon Chainrings: SRAM Xsync 2, 32 tooth Chain: SRAM X01 Eagle, 12-speed Cassette: SRAM Eagle XG-1275, 12-speed, 10-52 tooth Brakes: SRAM G2 RSC, 4-piston, SRAM CenterLine Center lock 180mm rotors Handlebar: Phoenix Team Low Rise Carbon, 780mm width Stem: Raceface Turbine R Kash Money Color Grips: Phoenix Factory, lock-on, orange Pedals: Hope F20 CNC Flat Pedals, Orange Saddle: Phoenix WTB Team Vigo Headset: Pivot Precision, sealed cartridge bearings Bottom Bracket: SRAM DUB, PressFit BB92 (PF92) Rims: 2022 DT Swiss XM1700 Spline, 30mm width, high end aluminum wheels only 200g heavier than the $2,100 XMC1501 Carbon wheels. Hubs: DT Swiss 350 W/ DT Swiss Brand 52T Ratchet Upgrade, Centerlock Spokes: DT Competition Straightpull Tires Front: Maxxis Dissector, 3C MaxxTerra, EXO+, TR, 29"" x 2.4"" WT Rear: Maxxis Rekon, 3C MaxxTerra, EXO, TR, 29"" x 2.4"" WT"

New in box, 32t chainring, boost spacing, 29mm dub spindle. Was going to use this with a 0mm chainring for a SB+ bike but finally found a SB+ spindled crankset so selling these. Never mounted them. Price does not include shipping or paypal fees.

Selling my rad lightweight trail bike, started off as an expert build but moved into some upgrades. FACT 11m carbon frame in raw matte carbon finish, Specialized uses this same frame on the S-works build. 2020 Factory Float DPS EVOL LV 190x45mm, 3 position adjust. Tune ID: DX6F 2020 Factory 34 Float FIT4, 44mm offset. Tune ID: DQHJ 2020 Fox Transfer Factory Dropper 150mm Easton Haven Carbon Bars with Ergon GE1 Grips Roval Traverse Carbon 27.5, 30mm inner width, tubeless Front: 2.5 Minion DHF 3C/EXO/TR Rear: 2.4 Minion DHR II 3C/EXO/TR Guide R Brakes - Newish pads and recently bled, 200mm front/ 180mm rear XX1 Chain XX1 Cassette GX derailleur and trigger Truvativ Descendant Cranks Recently replaced SRAM BB Hope F20 Pedals Weight is 26lb 6oz as seen. Rear triangle has clear protective wrap on it (that you can see is scuffed from my shoes), A few scratches on the clear coat here and there, nothing notable, no impacts. Will ship via Bikeflights for actual cost.