Apr 18, 2021 at 9:348 hours
Medium Black New without tags, been laundered once but was not worn. Just tried on. No issues just missing one of the zipper pulls that is a piece of string.
Jan 23, 2021 at 22:44Jan 23, 2021
Would consider trade for a Dirt Jumper, mid level type, not interested in a clapped out DJ, I want something I can ride but nothing built to pro specs as it will likely be commanding a large value. Also would consider trade for a CX/Gravel/Road bike, in decent shape. Once again, this is something that I will be riding so not interested in a super bike with blinged out parts. Shimano 105 level and up is preferred. Firm on price. Retail for this bike is more than what I am asking. In addition I have upgraded various parts on the bike so it is not very closely specd to the stock build. In great shape. Only owned for a few months, there are some minor paint scratches on the frame. My riding time has been cut down after the arrival of my son, one day I will be back but until then I would prefer someone get some use out of this. All parts are stock except for the following Brakes 2020 Shimano SLX 4 piston. Wheels: Industry 9 Torch hubs with Chromag Phase 30 rims Tires: Continental der Baron 2.4 front and rear set up tubeless. I will also include the original Maxxis DHF and DHR, they were only used for two rides. Shifter: Shimano xt 12 speed Rear derailleur: Shimano SLX The rock shox fork has the upgraded piston which makes it sit higher in the travel. https://www.norco.com/bikes/2020/mountain/all-mountain/sight/sight-c3/
Jan 23, 2021 at 22:37Jan 23, 2021
Firm on price Will consider a trade for a quality 2 inch hole bike rack. Something comparable to this would be the only thing I would consider. So don't offer to trade me a rusted out $200 rack, it has to be something that I would use.
Sep 26, 2020 at 19:21Sep 26, 2020
In great shape. Only used a few times. Save your drivetrain by knowing when to change out a worn chain. This will allow you to tell in a matter of seconds if your chain is worn beyond the acceptable limit and if it should be changed.
Sep 26, 2020 at 19:19Sep 26, 2020
This cassette was installed once and after a short ride around the block I realized that my derailleur could not handle the larger gearing. It is basically brand new. A wide range cassette for an 1x11-speed drivetrain. It's compatible with standard Shimano freehub bodies. The MX80 ticks all the boxes when for construction quality, durability and weight. With an aluminum and steel cog to balance weight and durability, and alloy gear carriers to spread the load on your freehub, this cassette is ready to roll. 2 largest cogs are made of light, durable 7075 aluminum. Remaining cogs are high-tensile steel for durability. Top 7 cogs and mounted on 2 aluminum spiders to save your freehub body and keep the weight low. Aluminum lockring and spacers. Compatible with Shimano/SRAM HG freehub bodies.
Sep 24, 2020 at 23:19Sep 24, 2020
condition: good make / manufacturer: SRAM model name / number: SX / GX part type: derailleurs I have a lightly used SRAM SX rear derailleur. It is for use on 12 speed drivetrains. This was paired with a GX shifter. Both are in great condition. No damage. Only selling because I have a Shimano drivetrain now.
Sep 20, 2020 at 12:38Sep 20, 2020
Bought it Nov 2019, have ridden it sparingly as I own two other bikes. Size XL fits 6'1 to 6'5. I am on the low end of the scale on the fit range and the bike works great for me. Bike can be run with 27.5 plus tires/wheels or 29 wheels. Currently stock set up with 27.5 plus. You can check out the geometry here. https://rsdbikes.com/portfolio/middlechild-chromoly/ 64.5 degree headtube angle which gives a very nice ride. 489mm reach I have done a few minor upgrades to the bike from the stock build -Front fender -Tires set up tubeless -Waterbottle cage -Handlebar is a Bontrager aluminum bar 780mm with 28mm rise. I switched this from the stock bar for a higher rise. There are no issues with the bike. It is in full working order. The wear parts such as brake pads, chain, tires etc have very minor wear since the rides have been minimal. I have been alternating between 2 other bikes. Here are the specs Frame: 27.5+/29 Cr-Mo 4130 Double Butted and Heat Treated Fork: Pike RC 27.5+/29 Boost with 140mm Travel Headset: Cane Creek ZS-44 Stem: Race Face 35mm Turbine 50mm Grips: Lizard Skin Northshore Front Wheel: Sun Ringle Duroc 27.5x50mm Front 15x110mm Boost Rear Wheel: Sun Ringle Duroc 27.5x50mm Rear 12x148mm Boost Crank: Race Face 175mm Turbine Cinch DM Chain Ring: Race Face 30T NW Ring BB: Race Face 73mm BSA Chain: KMC X11SL Cassette: Shimano XT 11/46T 11spd Rear Shifter: Shimano XT 11spd Rear Derailleur: Shimano XT 11spd Brakes: Shimano XT 4 Pistons Rotors: Shimano SLX Saddle: WTB Koda 142mm Comp Seat Post: Race Face Turbine / KS Lev Integra Dropper Rear Axle: SRAM Rear Maxle Ultimate 12x148mm Tires: Maxxis Minion DHF 2.8 and DHR II 2.8 3C Maxx Terra EXO TR Let me know if you have any questions.
Posted in "Anyone ever been in contact with kona?"
Aug 7, 2020 at 23:08Aug 7, 2020
Aug 7, 2020 at 22:20Aug 7, 2020
Brand new front and rear. Does not come with rotors or brake adaptors. 1600mm rear 900mm front
Jul 22, 2020 at 23:19Jul 22, 2020
Lightly used chain guide that came off of a Norco sight. Comes with 2 mounting bolts with washers. Fits chainrings from 26 to 34. Guide can flip up by hand for easy chain removal. Adjusting bolt on the face of the guide will move the guide in and out to provide rub free operation.