scotty27

Commencal Absolut SX slope style / free ride bike, SIZE: LONG, 9 speed custom build project with top spec components. Near New condition! Would make a great free ride / mini DH bike for adults, or a capable trail centre / DH bike for the shorter rider or youngster starting out. I'm 6' 2" and still find it easy to ride on most trails! Its nimble, light yet solid and will handle all but the roughest of DH trails. With the geared set up it can be pedalled up hill too! Or changed into a single speed bike for dirt jumping: as you like. £1,150 (ono) as its in great condition; many main parts are almost new. No dents or large scratches. NO marks at all on sanctions of forks or shock! Only a few small wear marks to the frame / fork lowers, as you would expect to get on a used MTB bike, most of these are from being transported on my car rack. I have only ridden this bike approx 10 times! All in fully working condition. Only selling as I don't get the time to use it anymore as my family has expanded recently. To build up a new bike with this spec it would cost you over £3,600!!! Spec; Absolut SX VIP frame kit (long size), 140mm travel, FOX float R shock with pro-pedal (both single speed and geared drop outs included) RRP £1500 (nearly new only 10 rides) Rock Shox Argyle RCT, 2011, 140mm travel fork (dual air, compression & motion control, 20mm maxel lite) RRP £640 (near new; only 6 rides) Shimano SLX single ring, 36 tooth, crank set £155 (new: only 3 rides) Diety 50mm rise, 750mm length bars, RRP £45 (near new only 6 rides) Thompson inline seat post RRP £80 (near new only 6 rides) Susperstar seat clamp RRP £8 (new only 3 rides) Spank Tweet Tweet dirt jumper saddle RRP £40 (near new only 6 rides) E-thirteen SRS chain device RRP £110 (nearly new 10 rides) E-thirteen 36 t bash ring RRP £40 (used) Straitline wedge stem 65mm reach. RRP £100 (used) ODI ruffian mx lock on grips RRP £20 (used) Front wheel: Hand built hope pro II hub on Mavic 721 rim 36 spoke, 20mm axel (used) RRP £150 Rear wheel: Hand built hope pro II hub on Mavic 721 rim 36 spoke, 135mm x 12mm axel (used, recently trued / serviced) RRP: £210 Axel; 12mm hub to 10mm dropout, adaptor bolt through axel. RRP £10 (used only 6 rides) Tyre: front: Maxis High Roller 60a, maxipro 26" x 2.35" RRP: £35 (used) Tyre: rear: Maxis Larsen TT 60a maxipro, 26" x 2.1" RRP £35 (used) Shimano XT shadow rear derailleur (RRP £75 (used) Shimano XT 9 speed gear level RRP £55 (used) Sram 980 9 speed cassette RRP £55 (used) Sram chain RRP £20 (used) Formula K18 disc brake set + upgraded 8" rotors (front & rear) inc adaptors RRP: £350 (used) (rear recently serviced; new pistons & seals). Total Build cost RRP: £3643!!! I will also include the unused drop out adaptors that came with the frame kit should you wish to change the bike to a single speed. Likewise the original Commencal saddle and seat post. I have owned all parts of this bike from new. Those listed as "used" have come off another bike of mine to facilitate this build and as such are more used. The other parts listed have seen very little use. Never crashed, never raced, never jumped high or ridden in heavy wet conditions and only been ridding on medium grade (orange & red) trails at Glentress. Professionally built and serviced. TXT me for more info. 07809207122 Grab a bargain!!!

Top of the range new style Giant Glory 00 DH bike. £1850 (ono) as it really is in such great condition its almost new. No dents or large scratches. NO marks at all on sanctions of forks or shock! Only a few small wear marks to the frame / cranks , as you would expect to get on a used MTB bike. I have only ridden this bike approx 12 times! Almost all of the original factory barcode stickers are still present; its seen that little use! All fully working. Only selling as I don't get the time to use it anymore as my family has expanded recently. Same bike as Team Giant rode, with great success, in the 2010, 2011 & 2012 world cup series. A new bike with this spec would now cost you well over £5000! Spec; Giant glory 00, frame size large (with head set angle reducer) FOX 40 RC2 FIT forks (ti spring) FOX DHX RC4 rear shock, air tune boost value (with steel spring) Full Shimnao Saint group set inc brakes (with upgraded rear disc brake) Mavic 721 DH rims on Saint DH hubs. RRP £4000!!! I have made the following up grades; Elements Nickel-Wide low rise, triple butted Aul, DH bar (780mm length) RRP £60 Straitline direct mount stem, short (28mm reach) RRP £100 ODI Troylee lock-on grips. RRP £25 Thompson lay back seat post RRP £80 Thompson seat clamp: RRP £20 Shimano DX pedals RRP £70 Rapid Racer Products front mud catcher RRP £15 Works Components head set angel reducer: takes head angle out to a world cup winning 63.5 degrees slack! RRP £80 Superstar Aluminium 150mm axel (much lighter than stock steel axel) RRP £15. Shimano 8" rear disc brake & mount RRP £40 & £15. Mavic high roller dual ply DH tire 2.7" x 26" (front) RRP £50 Mavic Minion dual ply DH tire 2.5" x 26" (rear) RRP £50 Will also include Maxis spare 2.5" x 26" DH inner tube RRP £15 Total upgrades worth £635!!! I will also include the original Giant in line seat post & steel axle for the rear hub. Although the frame is large the stand over height is only 17.5" so can accommodate mid height riders too. Race ready for the serious DH privateer or for those just looking to beast some runs (in style) at Innertleithen or Fort William etc. This bike weight approx 17.8 kgs; which is still light for a DH bike! I have owned this bike since new, the frame still holds a warranty (can provide proof of purchase). Never crashed, never raced, never jumped high or ridden in heavy wet conditions and only been ridding on medium grade (orange) DH trails at Innerliethen. Professionally built and serviced. TXT me for more info. Grab a bargain!!!

Near new condition, all in as new working conditon, no marks to rim / hubs, have been used on the road only for 1 week as commute wheels in dry conditions with under 30 miles on them in total, came off a new bike of mine, no longer need as i got round to getting up grade wheels, would make a good replacemnt set for any mountian bike not looking to up grade to expensive wheels. OEM wheel set but good quality. preffered collection in edinuburgh. any questions just ask. spec; all black 9 speed (7/8 with spacer) compatiable standared cannondale front and rear OEM, XC hubs (both q/r hubs) dt swiss spokes laced to alex Alex DP-17 26" XC rims includes rim tape. includes black cannondale F&R Q/R skewers note; as expected there are some cosmetic markes to the fee hub body from fitmet of a cassete and the decribed use (see above), these in no way impede on the function of the wheel and cannont bee seen once cassete is in place.

AS NEW, mint condition, never used, came off a new bike of mine surplus to my requirements. collection prefered but will post if needed, any questions just ask. these are hollow tech forged crank arms with chain rings as detailed below. just to be clear; this is not the hollow tech II bottom bracket fitment type chain set. this chain set requires any shimano splined bottom bracket, which i also have in the same conditon and will include (if you require 1) for a extra £10 fee. more info / pics can be found here; http://www.bike-x-perts.com/en/product_info.php/products_id/135309 many thanks specs; Shimano Hollowtech Crankset - stability and stiffness by modern forging technology. Manufacturer: Shimano Model / Type: crank set Deore FC-M521 (black) Crank arm length: 175mm Teeth: 44-32-22 teeth Special: 44T teeth made of Alu Weight: 712g