toner

Finally selling my Push Elevensix. Had it for a few years. Bought it for a Ripmo originally, and had it reconfigured to fit my Arrival when I changed bikes. Always sent it back to Push for an annual rebuild. Only selling it to fund my Vorsprung Telum love affair. Size is 185x55mm Trunnion mount. Lower hardware is 8x30mm. Springdex (430-500lb) has 1 ride on it. Comes with a spare spherical bearing. Little bit of anodizing rubbed through on the adjuster body from a hastily installed bottle cage. Will ship at buyer’s expense. Send me a message with any questions

Fresh from a service at ion2. Has a Vorsprung Smashpot coil conversion. Has a 50lb spring in it, but will come with a 45lb spring as well. (I’m about 160lbs, and a 50lb spring works well for me). Damper side has just been upgraded with a Grip X2 cartridge. I Haven’t even ridden it since. Steer tube is 160mm long. I just spent nearly this asking price on it’s last trip to the shop. I’d like to recover that cost, but if not, I’ll probably keep it around as a spare.

Ridden once and taken off. They’re still clean and tight. Haven’t even really seen a proper heat cycle. It was a winter fabike ride. Reach out with questions. I’ll ship at your expense

Selling these funky flats. They’re cool. I originally bought 2 sets. I’m keeping a pair, and selling a pair. Get them for cheap. Gorgeous manufacturing and design. Shockingly grippy feel. Clever solution for unique bike fit expirements. Only ridden for maybe a dozen rides. Will ship at buyer’s expense

Finally selling my Push Elevensix. Had it for a few years. Bought it for a Ripmo originally, and had it reconfigured to fit my Arrival when I changed bikes. Always sent it back to Push for an annual rebuild. Only selling it to fund my Vorsprung Telum love affair. Size is 185x55mm Trunnion mount. Lower hardware is 8x30mm. Springdex (430-500lb) has 1 ride on it. Comes with a spare spherical bearing. Little bit of anodizing rubbed through on the adjuster body from a hastily installed bottle cage. Will ship at buyer’s expense. Send me a message with any questions

Selling one Size2 (Large) We Are One Arrival 130. These frames are ideal for rider/owners who enjoy tinkering. One frame can become a multitude of different bikes depending on the links installed. 170/152/130mm rear travel configurations, coupled with a different fork&shock will keep this bike relevant for a few more years easily. I paid around $3400 for this frame, sans shock, as a former WR1 employee. This is a great deal on a complete bike. Details including: -140mm travel Rockshox Pike Ultimate with fender -185x50 Rockshox Super Deluxe Ultimate Air -170mm Rockshox AXS Reverb dropper post -Front Wheel is a 32 hole Sector rim (28mm inner width), laced to an i9 1/1 hub with CX-ray spokes and rockshox torque endcaps on the hub -Rear Wheel is a 32 hole Sector rim (28mm inner width), laced to an i9 1/1 hub with CX-ray spokes and an XD driver body -bar/stem is a DaPackage. 45mm stem/27.5mm riser bar cut to 750mm wide -Magura MT7 4piston calipers with MT Trail levers/carbon blades (203mm front rotor, 180mm rear rotor) -SDG saddle -165mm long Shimano SLX cranks -Works Components -1degree angle headset -Shimano XTR 12spd Shifter pod -Sram XO1 520% 12spd derailleur -Sram Eagle 500% cassette -Maxxis Assegai exo+ maxxterra front/DHR 2 exo+ maxxterra rear -pedals not necessarily included Fork, shock, and seatpost were all serviced by Ion2 Suspension at the end of last season, and haven’t been ridden since. Weight as pictured is 31lbs, 15oz. Located in Fernie, but I frequently visit Lethbridge and could deliver to surrounding area. I’m not keen on the thought of boxing it up to ship.