Smith to Feeble mtb 24"

 there's no double tire, watch again

 Yeah, you hop from one tire to the other. Not a big deal, I'm just saying it doesn't look dialed. Once you go straight from one grind to the other without using the tires, it'll look really sick!

 Oh, ok i get it. The worst thing is that is soo easy trick to do on bmx but even a litlle lift on my bike it's like 10 times harder because of my bike geo, short and with the lowest front possible, I'm going to raise it by higher fork and spaces udner stem so when I do it, possible in 2012 after all school things and exams I'll record all trick with smiths and nosemanuals again - without hop from one tire to the other

 You should take all of your short videos and edit them together and just make one really cool video!
Go look at my videos, and check out all the grind stuff. I ride a 26", but also have the lowest front end possible. So I know what you mean.

 Look at my edit "Marysin" and "Marysin 2" - it's like a lot of different grinds sth like 1-3 min.

I become accustomed to my bike but after I learnt most of grinds and started to do combos or sth it's not that easy like on fa. bmx
Also i've got RHD and there is a problem with doublepegs, I started to do oppo's doublepegs and oppo's crooked but it's not the same.
Low bb, 414mm fork, 24" wheel and the shortest steering tube became annoying and hard to even do proper high bunnyhop

 Check my new bike out. The frame has a 20mm BB rise, and a 110mm rear spacing. So I can ow double peg rails and run a left side drive. Watch this real quick.

vimeo.com/31377328

 So it's like a NS Bikes Capital 26" version , right ?
My friend got set on 26 capi with pegs, he changed from bmx cause he is like 190cm tall and he claims that biuld is much better than bmx

 No. Mine was designed and built well before NS went with their set up. In fact, a few of us were wondering if they got their design from the PB forums because their numbers are almost identical to mine, and my designs were leaked out.

 I don't think so. A lot of polish riders were complaining about frames, there is a lot of 24 for street but any 26 for street, and they had put 26 i suburban 24 etc, also they write their ideas.. They were moaning about it quite a time

 That's what I'm saying. Shortly after our blogs went up and our ideas/designs were put up......... Then NS went ahead and started doing their thing. We've already gotten into with them about it. No big deal really. The only thing that bothers us is that they won't admit they jacked our plan. I currently ride for a Polish company anyway, and I've been designing bikes/parts for a long time now. I'm very up on what's going on in the industry. Some times more than a year in advance.