triches

Cannondale C3 riser bar from 2011 Cannondale Jekyll 5 (shameless plug - it's also for sale with, among other things, new Chromag bars). In good condition, some scratches on the coating where the locking grips sat but no visible scratches or dings. Fits 31.8mm bar clamps, and is 655mm wide and weighs only 300 grams. Can ship internationally, but it will cost extra depending on the location (probably around $10 or $15 extra). No trades, please.

Transition Bike Co. Temple Lite stem for a 1.5" steerer tube and 31.8mm bars. Has a 50mm reach and 6 degrees of rise, and is 43mm tall (stack height). Machined out of aluminum, weighs 210g, and is bulletproof. I have the same stem on my bike and I've never had any problems with it. Also, it's green, which is the fastest color. Shipping internationally (outside of the US) will cost $5 or $10 extra depending on location.

OEM 2011 Cannondale C4 stem, with 90mm reach and a 7 degree rise. Fits a 1.5" steer tube and clamps to a 31.8mm bar. Taken off soon after the bike was bought, still in mint condition with all bolts and washers. Will take any offer (no trades though, sorry), and international shipping (outside US) would cost $5 or $10 extra depending on location.

Large (~19.5") Cannondale Jekyll beefed up for all-mountain and freeride use. Has a 9-speed drivetrain with an MRP bashguard and chainguide, E*thirteen chainring, as well as Chromag 780mm bars and a 35mm stem on the 1.5" steer tube. The complete list is, as follows: TIG-welded CAAD aluminum alloy frame. Couple small dings in the paint (shown in the pictures) but the frame is in good shape. No rock strikes or anything of the sort. RockShox Revelation dual air fork with 150mm travel with lockout, adjustable rebound and 15mm thru-axle and 1.5" steer tube Fox Dyad RT2 dual air pole shock with adjustable 150mm/90mm travel (bar switch included). I can also throw in the shock pump. Avid Elixr 3 hydraulic disc brakes and levers, recently bled. I can also throw in the Avid bleed kit and blocks. Single red E*thirteen 104bcd 34-tooth 4mm aluminum ring up front, 9 speeds in the rear (11-34 teeth). MRP bashguard and chainguide as well. SRAM X.7 rear derailleur and shifter Stock Cannondale saddle, seatpost, and headset, all in good condition. The saddle has a few scuffs on it. Chromag 780mm bars with Cdale locking grips and a 35mm machined aluminum stem. Also has a pair of burly flat pedals with threadlocked pins and greased threads that I bought used from a friend. Formula hubs, 32-hole SunRingle SR25 hoops, and 26"x2.35" Kenda Nevegals with plenty of life left. Spokes are DT Swiss if that matters. Purchased for $3000 plus $200 or so in aftermarket upgrades between the drivetrain, bars, and pedals. Won't take trades, but I will ship nationally ($50-100 extra depending on the service, and the wheels and bars will be detached and included in the package). Selling it cause I'm leaving for school soon and I haven't been riding enough lately to bring it with me. The overall condition of the bike is quite good, and I recently went to the shop for a check-up on everything and it's in thoroughly good health.