Cheers....see if I can find a decent picture. I have just made my first attempt to strip anodizing/sanding/polishing a seatpost and I have made a mess out of it!!! I'll try again later, maybe with some scotchpads.....
Cheers....see if I can find a decent picture. I have just made my first attempt to strip anodizing/sanding/polishing a seatpost and I have made a mess out of it!!! I'll try again later, maybe with some scotchpads.....
for anodized part get an owen cleaner, work like a charm
Cheers....see if I can find a decent picture. I have just made my first attempt to strip anodizing/sanding/polishing a seatpost and I have made a mess out of it!!! I'll try again later, maybe with some scotchpads.....
for anodized part get an owen cleaner, work like a charm
Cheers! I used drain cleaner with no success. Ended up sanding it down by hand but still a bit of residue left at the edges. Will try oven cleaner and fine grain sand paper. The oven needs a good clean too, so happy days....
Hi. Here's my paint-less bike (although some bits are black or white)
I made a mess with the seatpost so I'm taking it to somebody who knows what he's doing for deanodizing and applying some clear cerakote for protection.
Hey guys, here's my 2022 Knolly Chilcotin 159 Raw. Lots of polished DIY parts, you can check out the full bike on Vitals bike check section! Let me know if there's any other parts I should polish