None at None in Brighton, United Kingdom - photo by jezzah

Offset Bushings for sale, www.offsetbushings.com

Currently browsing: Sell Photo 172 of 546

jezzah

3,101 Views

18 Comments

9 Favs

Photo info

Album: Sell
Category: Parts - Suspension
Date Posted: Dec 13, 2011 at 14:42
Dec 13, 2011
Location: Brighton, United Kingdom
Trail: None
Riders: None

Photo details

Photo Size:

Camera

PENTAX K-5

Lens

smc PENTAX-DA 17-70mm F4 AL [IF] SDM

Shutter Speed

1/45

Aperture

11.0

Focal Length

39.0 mm

ISO Speed

800

Date

2011:12:13

Time

21:00:42

18 Comments

freerideglory (Nov 20, 2012 at 1:33)

If the bushing is offset, does that mean the bolt going through them needs to be changed to fit? Also, what degree can they slacken by?
Cheers.

jezzah (Nov 20, 2012 at 3:09)

They use the original bolts, nothing to worry about there! Up to around 1.5 degrees off with 6mm bolts and 1 with 8mm bolts.

freerideglory (Nov 20, 2012 at 9:59)

Thanks a lot mate

Do they also drop the BB height?
If so, by how much? I think my bolts are 8mm.
Joe.

jezzah (Nov 20, 2012 at 10:55)

Yes they do. Depends on the bike due to linkage ratios etc. Though usually around 5/6mm

freerideglory (Nov 23, 2012 at 14:17)

Sounds spot on! Set of these on my Christmas list

freerideglory (Jun 16, 2013 at 2:12)

Could you give me the details on what could be done with an 07' Giant glory freeride? I don't know the bolt size, etc.
Cheers, Joe.

jezzah (Jun 17, 2013 at 2:12)

Hi Joe, The glory takes one bush. A 30x8mm. Just make a note of your bike when ordering through our site, www.offsetbushings.com Cheers! Jeron

irankin9114 (Jan 18, 2014 at 7:31)

Do you reckon these work work for accommodating a slightly larger shock whilst keeping the i2i length near enough the same, providing more travel with the same geometry?

jezzah (Jan 19, 2014 at 14:28)

Depending on how much adjustment you need, then yes - they would work.

bren2709 (Dec 18, 2012 at 13:03)

Finish on the brass outside diameter don't look too clever, is this finished turned or just stock size?

jezzah (Dec 18, 2012 at 13:53)

Stock size. It's not as pretty as a fully finished / polished item obviously, but its not a product that is visible at all and using stock rod allows us to charge a far lower price.

bren2709 (Dec 19, 2012 at 5:13)

Does that not cause play between the bush and the brass bushing?
Was always under the impression it should be a nice press fit, resulting in no pay.

jezzah (Dec 19, 2012 at 8:35)

Nope, its a smoother fit than a standard bush as its stock rod. However considering the sheer number of these I have sold, you'd be surprised at how small a number of problems I have ever had. The next step is to start machining the brass down from larger dia. rod. That way I can make them a tighter press fit - though its far more labour intensive and would put the price up.

jamescarinduff (Mar 30, 2013 at 13:30)

Gimme some cock

dirtnapped (Feb 27, 2013 at 18:30)

Looking for some for a Bandit. What would the cost be to ship to the US?

jezzah (Feb 28, 2013 at 3:12)

We have made a lot for the Bandit so thats no problem.

£8 for US shipping. So for a pair (£20) including shipping it is currently $42.46

Alberto-Jr (Mar 23, 2012 at 14:36)

hi, what are the sizes?

jezzah (Mar 23, 2012 at 15:21)

Any size, we machine them to fit your bike. Every set is custom