Pinkbike.com
Powered by Outside
Bryce72589
- Member since Dec 7, 2012
- Male / 37
-
Irvine , California - 7 Followers
- 1 Trailforks Points
Recent
Bryce72589 konaworld's article
Mar 30, 2018 at 22:33
Mar 30, 2018
Kona Taps into the Unique Freedom of Riding - Video
@g-42: I feel exactly the same about my 2015 111. I recently dropped my fork from 140mm to 130mm and installed a 1.5* works angleset. The angleset and 10mm fork drop brings the bottom bracket back down making the bike handle better than the 140mm setup. The front end is super confidence inspiring with a 66* head tube angle and makes the bike really aggressive in the steeps.
Selling
Dec 30, 2017 at 19:16
Dec 30, 2017Kona Honzo Large Frame
$320 USDSelling my beloved 2015 Kona Honzo aggressive cromoly hardtail large frame. A bad crash has ruined the cartilage in one of my knees and my orthopedic surgeon does not want me shredding steel hardtail any longer. This bike is able to descend anything you are brave enough to put it down and climbs like a mountain goat back up to do it again. I have beaten people with $5k+ bikes in enduro and super downhill races on this frame and gone toe to toe with full rig downhill bikes at big bear and mammoth mountain on the more flow focused trails. All the while still being able to race cross country on the same bike with the swap of some tires. Its meant to ridden with a 120mm fork but it handles a 140mm fork very well if your into more aggressive riding. It was ridden hard for about a year and the frame has been sitting in storage well protected for the past 2 years after I stripped the components to be put onto a process 111 and then my knee fell apart.
The frame includes a Cane Creek sealed cartridge headset, some headset spacers, dropouts with a 12mm SRAM Maxle, and a Shimano XTR Hollow Tech II bottom bracket
There is a decent amount of cosmetic damage from cable, tire, and chain rub. All in all the frames paint job is still in very good shape
Super short chain stays (420mm), a very low bottom bracket, and long reach is what makes the Honzo such a playful bike even though its a 29er. Whether you build it up as a budget bike or spec it out with top notch components it will be a blast to ride.
Here are a couple of videos of my glory days on the bike to give you a sense of what it is capable of...
https://www.youtube.com/watch?v=mkPoalfxfkE
https://www.youtube.com/watch?v=pGjgTb8-Nlw&t=202s
Both are with a 140mm fork up front
Bryce72589 JordanCarr's article
Nov 18, 2013 at 16:33
Nov 18, 2013
REEB Cycles All-Mountain - Review
The Honzo has shorter CS and the frame will cost a 1/3 the price.
Bryce72589 Bryce72589's video
Sep 23, 2013 at 15:32
Sep 23, 2013
Didn't really answer your question, 120mm on the Honzo makes DH still possible and i would say more than just OK. The real key is to keep the fork a little stiff and to go tubeless on a 2.3+ tire around 20-23 psi. That way the tire soaks up the small bumps and the fork can still handle big hits without bottoming out.
Bryce72589 Bryce72589's video
Sep 22, 2013 at 14:25
Sep 22, 2013
I bought the fork for a previous build that turned into my Honzo. I have allways contemplated putting a 140 on it, but don't have the money at the moment. I have heard on the forums that 140 doesn't throw the geo off that much, but don't take my word for it. For me lift served DH only accounts for less than 5% of the riding i do. I would consider myself a Aggressive XC / AM rider that goes the distance to get in as many trails as possible in a single ride, for this type of riding the Honzo is dialed in at 120mm. I have heard many people say 120mm is all you need for agressive 29er riding, yet i still wonder what 140mm would feel like. Anyone out there reading this ride a 140mm honzo? lend us your 2 cents!
1,910 views


