Craftworks-Rider

I've had the frame since new (one of the last ones made) and built it up with all the bits I wanted. I was holding on to the bike to rebuild for racing in retro classes, but now I'm moving so it needs to go. Has been sitting only ridden once in the last 6 years, so will need forks and shock service. It comes with a spare axle, hanger and shock hardware, as this is my second Sunday frame. All parts are still available for these online. Head angle is 63 degrees and the BB height is about 13.6" with the K9 headset fitted depending on how high or low I set the crowns on the 40s. Parts Frame: Iron Horse Sunday. Size: Medium Rear Shock: Fox Racing Shox DHX 3.0. 300 & 350 lbs Spring Fork: Fox Racing Shox 40 RC2 Ti spring Headset: K9 -2 degrees Handlebar: Renthal FatBar 760mm - Mid Rise Stem: Funn Grips: ODI Troy Lee lock-on Brakes: Avid Juicy 7 lever with code caliper Shifters: SRAM X9 Trigger Rear Derailleur: SRAM X9 short cage Chainguide: Gamut P30 Cranks: FSA gravity light Chainring: e*thirteen 36t Chain: KMC Cassette: Shimano Saint/SLX Cassette 9 Speed HG80 Pedals: Shimano DX M647 - Clip-in Front Rim: Sun Ringle Equalizer 31 Rear Rim: Nukeproof Generator (Sun Ringle MTX 29) Hubs: Hope Pro 2 Spokes: DT Swiss double butted Front Tire: Magic Mary 2.35" Vert-tar SG Rear Tire: Magic Mary 2.35" Vert-tar SG Saddle: Charger spoon Seatpost: Thomson Elite Model Year: 2009

Will ship for £40 (Parcel force 48 & PayPal fee mainland UK) Size Medium 160mm travel Cane creek DBair shock with climb switch. 30.9 seatpost 12x142mm axle (non boost) New in February 2015 but not ridden much (as I've had 2 kids since then) and hasn't been ridden at all since September 2018 (as I got my new frame). Has been heli taped since new, some rub marks and one area of shallow scratches (no carbon threads visible). Shock was serviced by sprung August 2017 and I cleaned and lubed inside the air can 6 rides ago. There is a couple of very small marks on the stanchion but they have never caused pressure loss. Comes with a 4 ride old Sram GXP BB, a cane creek 40 headset (for tapered fork) and seat clamp. I've just checked all the bearings and they are good for a while yet. I don't ride much in the wet and its been transport inside the car so is in good condition for a UK bike.