Added 1 photo to Parts-FS
May 15, 2017 at 3:21May 15, 2017
Added 2 photos to Parts-FS
Feb 7, 2017 at 5:28Feb 7, 2017
Nov 22, 2016 at 4:16Nov 22, 2016
Perfect condition blue Titanium spring for a Fox 40. This is the slightly smaller diameter (later) spring, it will fit in any coil sprung 40 made, as far as I know. I have also managed to fit it into a 2009 888 by removing the spacer tube. Blue is a bit lighter than Green, I found it perfect for me (185lb) Has shrink wrap in the middle for less rattling.
Added 4 photos to Parts-FS
Oct 29, 2016 at 20:10Oct 29, 2016
Oct 29, 2016 at 20:09Oct 29, 2016
No markings on it, was told when I bought it it was a 350, and it does feel a bit lighter than the 400 i had on the bike previously, so I am inclined to believe it. Was on an Avalanche, so it fits large diameter shocks. Shipping $8 within Canada, $14 to the US.
Jul 27, 2016 at 16:56Jul 27, 2016
Like new Tech Evo v2 levers - with the bearing pivot and roller actuation on the master cylinder. M4v3 front caliper and M4v4 rear - one caliper seized so it was replaced with a brand new v4 caliper, hasn't been used since. The other caliper is in perfect shape. Hose lengths - Front 39" and Rear 59" (braided steel) Unreal stopping power and insane modulation - what Hope is famous for. You can use these with any rotor, they dont require anything fancy (avid or shimano rotors will work) Shipping $19 within Canada, for US shoot me a message and I will check.
Added 3 photos to Parts-FS
Jul 27, 2016 at 16:50Jul 27, 2016
Added 4 photos to Parts-FS
Jul 18, 2016 at 14:12Jul 18, 2016
Jul 18, 2016 at 14:11Jul 18, 2016
Upgraded to a 180mm fork, so this baby is up for sale. Travel adjustable air sprung fork - 160mm and 130mm (2 position) NO stanchion scratches, and only one scuff on the bottom of the right leg that has gone through the paint. Otherwise nothing major at all. Been very well taken care of. Just changed the oil and put new seals, it works as new. Tapered steerer is just under 8 3/4" long. Shipping probably in the $20 range within Canada, for US PM me your ZIP and i'll let you know.
Jun 23, 2016 at 12:51Jun 23, 2016
Bought from first owner, had it shipped in from Hawaii. When I got it, the frame was in almost showroom condition, with the exception of some deep nicks on the edge of the upper swing link. I'm guessing a serious crash put an end to the original owner's biking, and he just ended up selling it. Frame has 3M tape on the downtube to help protect from rock chips. Aside from those nicks the frame is in basically perfect shape, I havent added any damage. Wheels are Hope Pro 2 hubs laced to Sun MTX29 rims, the rear rim is brand new. Tires are Maxxis DHF 2.5 super tacky, front 90% rear 70-75%, easily a few seasons left. Avalanche Woodie rear shock (gorgeous, and feels incredible) and 888 with Avalanche damper installed. Parts list: Frame - Medium 2009 Canfield Brothers F1 Jedi. 9.5/10 condition! Shock - Avalanche Woodie - 550LB steel spring, good for a 180-190lb rider. High/Low speed compression and low speed rebound adjustment. Fork - 2009 (I think) Marzocchi 888 - medium steel spring, Avalanche damper. Originally an ATA I think. Basically also in perfect condition, no scratches on stanchions or major gouges in lowers. Bar - Renthal Fatbar Brakes - Avid Code R 4 piston, with 200mm Avid HS1 rotors Shifter/Derailleur - SRAM x7/x9 short cage Crank - Saint Pedals - Nukeproof Electron (nylon body, fantastic grippy pedals) Seatpost - Easton Seat - Bontrager Wheels - MTX29 laced with DT spokes to Hope Pro 2 hubs The rear brake hose is too long (switched brakes recently) and both brakes need bleeding, both will be done before sale. Anything else dont hesitate to ask! I have too many bikes, so trying to move this one. Courier shipping (3-4 days) within Canada should be in the range of 140ish for frame and wheels, I would get it professionally packed up by a local bike shop. To the US, please ask for a quote (and give your ZIP)
Red Bull Rampage 2012 - Wednesday: 33 Nugs
3 Oct 2012
Fox Debuts New Downhill Fork - 40 RAD
1 Jun 2012