Grumpy

18" On-One 456 Carbon frame in Flat Black with Grey Decals, there are a few marks on the chainstays from heel rub, and there's a chip missing from the bb shell but nothing major. Sizing comes up quite small. 150mm Rockshox pike, rct3 solo air suitable for 26" wheels. Paint rub on the crown and the lowers have a few marks but the stantions are in good condition. Steerer tube has been left with plenty of length . Hope pro2 straight pull hubs laced to 26" Stans ZTR Arch EX rims. Set up with tubeless Hans Dampf. There are also a pair of shimano disks still attached (203mm both ends if I remember correctly) and a 10speed cassette fitted. Comes with: a Hope mix and match headset, Burgtec Carbon seatpost, Mavic composite rear skewer, straightline amp 50mm stem and a spare set of geared drop outs. Also comes with the dropouts to convert to horizontal single speed. This bike is the lightest set up I've ever had, for a 150mm hardcore hardtail its crazy light. It's well light enough for all day epics but burly enough to hoon around on. Just needs bars, brakes and drivetrain. If you want any more pictures or have questions please feel free to ask. Price includes PayPal fee and postage No I don't want an xbox, a tricycle, a goped or your sister for trade thanks

For sale: ISCG05 E Thirteen LG1 chain guide for 36-40 tooth chain rings, used but functional condition. Great for if you like to get wild and keep your chain ring straight and your chain under control! Any questions feel free to ask

For sale: 170mm long e thirteen cranks in 83mm BB width, unfortunately I'm a knob and can't for the life of me remember what type (possibly LG). Iv had these fitted for a couple of years but they haven't had a massive amount of use but are showing some heel rub. Comes with a 36 tooth raceface narrow wide chainring, again showing some signs of use but plenty more life left. Also comes with 83mm BSA threaded E thirteen bottom bracket and the correct tool for fitting. If I remember correctly these cranks can be used with any configuration of 30mm E thirteen BB Any questions feel free to ask

2013 Morewood Kalula Frame and BOS Idylle SC forks I am selling my much-loved Morewood Kalula frame and Bos forks, which I have had for less than a year. I bought her from the original owner. It really is one of the most fun bike I have ever owned. I am only selling because It doesn't get used as much as I'd like, living on a relatively flat island. The frame does have some marks on it, the worst of which being a small dent in the top tube: This was not the result of a crash, rather some idiot knocking it over and it falling on a rock. It is purely cosmetic and does not affect the frame whatsoever. It happened about two weeks after New and has not changed or had any affect since. There are some scratches on the top tube that are the result of various uplifts. There also other marks elsewhere but nothing that affects the performance of the bike. I have tried to cover these in the photos The frame will come with BOS Void shock (minor superficial mark on the stantion), SDG seat post and Cane Creek 40 headset (a couple of months old). Forks: BOS Idylle SC forks 180mm travel, 2013 model. I have had these a year and they have been serviced every year. They were last serviced by JTech in June 2015, but have had little use since. There is a small mark on the stantion but it has been professionally looked at and is nothing to worry about (uploaded a pic of service report) The tapered steerer measures 179mm. The pictures were from when I bought the bike a year ago but the bike has only been used on 2 uplift days since and not crashed. Unless you're offering me 650b solo air pikes I'm not willing to trade. Any questions feel free to ask

Right Im hoping to sell my DH bike to fund travel - large 2012 Transition Tr450 frame in yellow with fox RC4. the frame has a gouge in the shock tunnel where the shock bolt came slightly undone. doesn't effect the structural integrity. - '08 fox 40 RC2, grey lowers have quite a few marks, there are 2 scratches on the stantions but they don't appear to effect the performance. I have just done a weekend at BPW on them and they performed faultlessly. I belive they have a TI firm spring fitted - Sunline direct mount stem, grey, 50mm I think - Crank bro Sage 15mm rise bars, 760mm wide, black, lots of marks - Front Hope Pro 2, in Blue, on old style Ex729 rim. the rim has some damage to the inside channel but i didn't notice it whilst using it, BUT IM NOT SAYING its going to put up with a mass of abuse. - 450 and 500lb shock springs included. - a selection of fork springs, possibly all of them - all the geo and chainstay tabs are included. the whole bike has only ever seen maybe 8 days of riding under me, most of them would be push up runs so probably less than 50 runs. living on the Isle of Wight, this bike rarely gets used and when it does, never to its full potential. I don't like big jumps and drops, preferring tables, so its not had any hard cases or nasty landings. bearings changed 3 rides ago. any questions feel free to ask, Andy