Block user


Added 4 photos to Transition-Scout
Jan 13, 2018 at 18:59
2 days
Jan 11, 2018 at 10:20
Jan 11, 2018

Scott Genius LT 710

$1750 GBP
It's time to part ways with my Scott. I bought the bike as an exdemo from Rutland Cycles at the end of 2015, in that time it's been a great bike and served me well. I am just under 6ft and the Large was a good fit for me The spec list is as follows. Frame: Genius LT 700 Carbon / IMP5 / HMF / BB92 / Alloy swingarm with 180PM U-Mono Link / Tapered Headtube IDS SL 142 × 12mm / integ. Chainguide BB height adj. / 170mm rear travel Rear Shock: FOX Nude / Scott custom w. travel / geo adj CTCD 3 modes: Climb - Traction Control - Descend / Boost Valve / reb. Adj. Travel 170 - 110 - Climb / 215 × 63mm (Upgraded Evol Air Can) Fox 36 Fit 4 170mm 15mm axle (Upgraded from the 2015 Fit remote cartridge. 20mm axle also included) Headset: Works Components Angleset Rims: WTB ST i25 Tubless Ready (Valves and Tape needed) Hubs: SRAM Tyres: Maxxis HR2/DHF 3C Maxx Terra Stem: Syncros XM1.5 35mm HB diameter / 0° angle Handlebar: Syncros AM1.5 10 Rise, 35mm, 9°, 760mm Grips: Raceface Seatpost: KS Eten-i 125mm Saddle: Nukeproof Horizon DH Pedals: Nukeproof Brakes: Shimano XT M8000 Levers, Zee Calipers Disks: Shimano Ice Tech 180/203mm Cassette: Sunrace 11/42 10 speed Shifter Shimano SLX Crank: Shimano XT Chainring: Works Components 32 Oval Mech: Shimano XT Custom Decals were done by Slik Graphics As with all used bikes there are some issues, the biggest issue is heal rub on the Seatstays but this is easily enough hidden with some tape. There is also some stone and storage chips on the paintwork. The fork has a couple of marks on the left hand stanchion but they have never caused any issues. There is no issues with the frame bearings that I know of but just in case I do have a set of new bearings that will include with the bike. The Fork CSU has been set up to take a OneUp EDC Tool so it does not need a conventional star nut but should you want to use a Star Nut again I will include one with the bike. Both the Wheels and Seatpost are new so have not yet seen any dirt. The bike is located in Edinburgh, Ideally I wold prefer cash on collection. Can also post (at buyers expense) but there may be a delay due to work shift patterns. Any questions feel free to give me a shout.. PS, I am not interested in an any swaps

Jan 11, 2018 at 9:58
Jan 11, 2018


Added 5 photos to Scott-sale
Jan 11, 2018 at 9:11
Jan 11, 2018
Added 26 photos to Scott-sale
Jan 11, 2018 at 8:56
Jan 11, 2018
Medacus pinkbikeaudience's article
Dec 27, 2017 at 7:23
Dec 27, 2017
Sam Pilgrim on Haibike?
@cunning-linguist: And there was me thinking "weebles wobble but they don't fall down"
Medacus pinkbikeaudience's article
Dec 27, 2017 at 7:22
Dec 27, 2017
Sam Pilgrim on Haibike?
@weebleswobbles: what a wee cry baby!! I guess you (whatever you are behind your faceless profile) think it's funny to threaten people by putting sticks through their spokes and to make fun of their appearances. If you can't take it don't give it!
Medacus pinkbikeaudience's article
Dec 26, 2017 at 23:33
Dec 26, 2017
Sam Pilgrim on Haibike?
@weebleswobbles: If he was to become the leader of some "douchebag" gang then maybe you can give him some tips? It sounds like you're already a master at being a douchebag!
Medacus mikekazimer's article
Dec 20, 2017 at 9:38
Dec 20, 2017
2018 Canyon Torque - First Ride
With that attitude you'd it wouldn't be long before you went out of business, most LBS's I know make more on servicing than selling bikes.
Dec 15, 2017 at 16:35
Dec 15, 2017
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2018. All rights reserved.
dv56 0.058607
Mobile Version of Website