alexadams

2016 Kona Process 134 Supreme, Size Large I purchased this bike from The Broken Spoke in Santa Fe, NM, and it has been a ton of fun over the last couple of years. I rode it quite a bit, and I kept up with maintenance as well. The shock was overhauled by Dirtlabs last fall, and it is working very well. The frame bearings were replaced last spring, and all the o-rings and Charger Bladder in the fork were replaced at the same time. Then, the frame bushings were replaced last summer. The cranks, chainring, and bottom bracket all all new to prepare for this sale. In April 2017 I found that the rear brake cable had worn a groove in the seat stay. The Broken Spoke bike shop reached out to Kona, and it was not a warranty issue. Rather, they suggested putting a strip of frame guard over the area. They installed the little strip of frame at the contact spot in 2017, and there have been no more issues. See photos. I’ve had a lot of fun on this bike, and I hope you enjoy it as well! Components: Rims: WTB Frequency Team 123 TCS, 27.5" (650B) Front hub: Hope Pro II QR 15 Rear hub: Hope Pro II 142x12mm Brakes: Shimano XT Handlebar: RaceFace Atlas Stem: Kona 40mm Fork: RockShox Pike RCT3 140mm Grips: Renthal Tires: Minion DHF 2.30, Minion DHR2 2.30, tubeless Derailleur: Sram X01 Cassette: 10-42 tooth Upgrades: Seatpost: Bike Yoke Revive 185mm Front Rotor: Shimano IceTech 203mm Rear Rotor: Shimano IceTech 180mm Shock: Fox Float DPX2 Factory (134mm travel) New Parts: New fill of Stans Sealant New GX cranks New Wolf Tooth 30T chainring New Wheels Manufacturing bottom bracket Significant Service: Shock serviced by Dirtlabs—October 2019 New fork o-rings and Charger Bladder—Spring 2019 Frame bearings replaced—Spring 2019 New pivot bushings and bolts—August 2019