bermkiller

Norco Torrent 7.2 is an all mountain 27.5+ 140mm hardtail. Works the same with 29” tires and dealers choice on what size fork you run. Tapered integrated headset, bearings installed in frame. Syntace through axle keeps the back stiff. Buyer pays shipping, cheers!

New 2019 Code R brakes with full length lines and Sram centerline 180mm rotors. All Hardware is included. ***one lever clamp was left out of the photos but is of course included with the brakes*** Shipping included.

price is OBO Fox 34 talas fork for sale, tapered steerer tube which is just over 7.5" in length. Fork uses a talas air spring for travel at 160mm or 130mm with the flip of a switch, running the FIT CTD damper. 15x100 hub spacing.

These wheels are brand new and unridden, same with the tires. Stan's Flow S1 is the newest rendition of their tried and tested flow rims. Boost spacing on the updated NEO hubs with the durasync XD driver. Maxxis DHF and DHRII 2.5"/2.4" respectively, 3C MaxxTerra EXO TR rubber mounted with inner tubes and tubeless valves will be included. $300 without tires

Price is OBO Im selling my Trek Remedy 8. I'm the original owner of this bike and have held onto it for the fact it has a lifetime warranty. It has essentially not been ridden for the last three years other than the occasional day ride with visiting friends. I have no need to hang onto this bike any longer and am looking to get it to someone who is looking to get a serious bike at a bargain price. I am a mechanic and can assure this bike has been meticulously maintained over the years including all frame services and bearings. All components on this bike have been changed several times over and thus the current set up has seen very little serious use. One last detail before the parts list, the bike is photoed with a 150mm travel Fox32 but I also have a 130-160mm travel Fox34 talas, happy to swap out or just include. Parts list; Frame- 2011 Trek Remedy 8 Fork- Fox 32 DRCV 150 travel (OR Fox 34 TALAS 130-160 travel) Shock- Fox DRCV Headset- Cane Creek 40 Grips- Renthal Lockon Kevlar Bar- Bontrager 31.8clamp, 25 rise 760 wide Stem- 31.8 clamp 50mm Seatpost- '31.6 Saddle- WTB volt Brakeset- Shimano SLX 2018 Rotors- Shimano 180mm Derailleur- Shimano XT Casette- Shimano 11-36 10spd Chainring- 26/46 Crank- Sram X7 175mm arms BB- Sram TEAM gxp Shifter- Shimano XT Front Hub- DT Swiss 350, 15x100mm, ceramic bearing upgrade Rear Hub- Dt Swiss 350, 12x1135mm, HG driver, ceramic bearing upgrade Rims- Stans Flow Tires- Bontrager XR4's tubeless

For sale is my custom built Norco Range C7.2. I built this bike in March of 2017 so it has been ridden for less than one year only. This bike is an absolute do it all machine at 160mm frame travel with a 170mm fork upfront. The derailleur is brand new and has never been ridden, frame meticulously maintained and cleaned. Hubs just received a full set of ceramic bearings. Suspension recently serviced with all fresh seals and oil. Front tire has less than 5 rides, rear tire is just two weeks older than the front. Bike is equipped with the pro series Revgrips which are tunable suspension grips, feel free to ask any questions. Some photos show details of the shelter tape I've installed on the back of the seat tube as well as underneath the down tube. Miscellaneous decals on frame were to be removed before shipping unless you'd like them to remain just let me know. The only standout defect on this frame is a tiny paint chip in the rear wheel arch, has been inspected and certified it is superficial in the water graphic, detail photo included. IMPORTANT==> Bike will be shipped with a brand new Renthal carbon FatBar Lite (760mm 35mm clamp, 40mm rise) as the CRD handlebar is a prototype model Bike details; Weight- 31lb 15oz (as photographed) Frame- '16 Norco Range C7.2 (medium) Fork- '17 Fox Factory 36, 170mm RC2, non-boost, factory gold decals Shock- '18 Fox Factory FloatX2, factory gold decals Headset- Cane Creek 40 Grips- Revgrip 31mm half-waffle pro series, black w/ gold collars Bar- Renthal carbon Fatbar Lite, 35mm clamp, 760mm width, 40mm rise Stem- Renthal Apex 50mm, 35mm clamp Seatpost- '17 Fox Factory transfer w/ transfer 1x remote, 30.9mm diameter, 150mm travel Saddle- Specialized Front Brake- Shimano XT M8000 Rear Brake- Shimano XT M8000 Rotors- Shimano RT86, 180mm Derailleur- Shimano XT M8000 Casette- Shimano CS-M8000 11-46t Chainring- Renthal narrow wide, 96bcd, 34t Chain- KMC X11SL-TiNitrade, Gold Crank- Shimano XT M8000, 170mm arms Chainguide- OneUp underbash with top guide BB- Shimano XT pressfit, BB three months old. Shifter- Shimano XT M8000 Front Hub- DT Swiss 350, 15x100mm, ceramic bearing upgrade Rear Hub- Dt Swiss 350, 12x142mm, HG driver, ceramic bearing upgrade Rims- Cascade Racing Designs CR29 27.5", Carbon 32h, 29mm internal/36mm external, 432g per rim Front tire- Schwalbe Hans Dampf V2, 27.5 x 2.6", Addix Speedgrip compound, less than 5 rides since new Rear tire- Schwalbe Hans Dampf V2, 27.5 x 2.6", Addix Soft compound Valves- Industry 9 tubeless valves, 40mm, turquoise. That's about everything, bike was built with all new parts and I've been the only rider. This bike is ready for any bike park adventure and/or 8 hour all day epics. Cheers!