bullerboy25

Hi, Up for sale is a pair of Ridge Components Carbon wheels with Ridge Hubs The wheels have been used but still run true and there are no cracks or issues with the carbon rims They are 32 hole with bladed spokes, laced onto green hubs They are a very lightweight strong wheelset The hubs may benefit from a bearing change as the front has started feeling a little grindy. They will also come with muc off tubeless valves 15x110mm boost front 12x148mm boost rear Internal rim width - 29mm External rim width - 35mm Any questions, feel free to ask! Looking for £250 posted Thanks

Hi, Up for sale is a set of Cane Creek Helm MK1 forks These are a good set of forks with a wide range of tuneability The forks are in good condition and have only be ridden a handful of times since the last service There are a couple scrapes and scratches on the lowers but the stanchions are free from any marks or nicks These forks have a positive and negative air spring and can change volume spacers internally as well The steerer is 215mm, boost axle, tapered steerer tube and made for 27.5" wheels Any questions, feel free to ask! Looking for £275 posted Thanks

Hi, Up for sale is a 2018 medium transition scout in orange The frame is mechanically sound with a few paint chips and scratches The frame is 130mm rear travel and will take upto 160mm fork on the front The headtube is tapered, 148mm boost rear axle, 31.6mm seat tube, 27.5" wheels Included in the sale is a Hope headset, rear axle, rear shock and seat clamp. I also have the internal routing covers included as well A good nimble frame that holds up well to most things Any questions, feel free to ask! Looking for £550 posted Thanks

Hi, Up for sale is a set of Rockshox Pike RCT3 forks The fork travel is 160mm, this was increased from 120mm using an upgraded Debonair spring This has the charger 2.1 damper with low speed compression and 3 points of lockout These are non boost so is 100x15mm axle, maxle is included The steerer tube is 195mm long and is tapered These have been used so show signs of cosmetic damage with a couple small marks on the stanchions but cause no performance issues These have been serviced regularly, with the most recent at the start of june with full strip down and fitted with SKF seals There isnt a clamp for the front brake hose as the thread was rounded it Any questions, feel free to ask! Asking £215 posted Thanks

Hi, Up for sale I have a set of 27.5" Stans Flow EX3 laced to Purple Hope Pro 4 hubs. The wheels are in good condition, only cosmetic marks Wheels run true, no dings or dents and no flat spots The hubs are in full working condition, rear hub has had brand new bearings prior to sale. Front has ceramic bearings from June 2021 that are running smooth The front hub is non boost 100x15mm The rear hub is non boost 142x12mm 32 hole rims/hubs I have a rear boost adaptor kit as well which I will include in the sale Can post or can do local collection Asking price of £320 posted Any questions, feel free to ask! Thanks

Hi, Up for sale is my Airdrop Edit V2 Enduro frame in size small This frame has served me well with a few upgrades along the way I changed the shock to a Fox Float X2 shock with climbswitch and a Superstar reach-adjust headset which increases the reach by 5mm The headset is 1/18th to 1.5 inch, BB is a standard threaded 68/73mm, ISCG 05 guide tabs, 30.9mm seat tube diameter, shock size 200x57mm The frame has been used well but is still fully functional. No dents or cracks just a few scrapes and scratches, some of which has been pictured. The bearings were changed to ceramic/SKF instead of standard stainless steel back in May/June, the headset was also installed around that time The shock has had a service prior to sale with new oil and seals Brake and gear lines are external routing but is able to take a stealth dropper post Rear axle is 142mm x 12mm and the rear travel is 155mm I think ive covered everything, if not, feel free to ask any questions! Happy to post or buyer collects NO INTERNATIONAL POSTAGE! Thanks