jonathon-wright

Atherton AM200 Size 6 460mm Reach INVISI Framed from new including forks, this is a used bike so the INVISI and bike will show signs of wear, this is a well looked after bike but has been ridden on average twice a month at DYFI and 2 trips to Morzine. I'm no sender, this bike has not seen any booters lol Full New Bearings in 2024 OHLINS DH38 M.1 front and coil back with 571lbs spring, tuned by DIALED and both serviced by J-Tech in 2024 Hope Pro 5 wheel set with the DH specific rear wheel, silver hubs these were new on the bike in 2025, Conti tyres front and back. TRP DH EVO brakes in silver with GALFER pads and Discs SRAM XO Carbon Crankset & The New OCHAIN R The new Reverse Components Expert Single Speed Kit and Reverse Components Colab Expert Chain Tensioner Title Seat Post with fi'zik seat Renthal Stem & 35mm Bars 30mm Rise, ODI grips Manchester Pickup or could meet within a reasonable distance or at DYFI

Manchester Collection, happy to meet half way or maybe Wales, can discuss depending on how far: Please ensure the pictures are reviewed, this is lightly ridden but does have signs of use i have probably ridden this 10 times: Original Spec: Wheels YT CUSTOM Aluminum Rims DT 533d 26“ | Inner Width 22 mm | Front Hub 100 x 15 mm Tires FRONT: MAXXIS IKON I REAR: MAXXIS DTH Front: Tire Size 26“ x 2.35 I Folding Tire I Rear: Tire Size 26“ x 2.3 I Wired Tire Suspension Fork RockShox Pike DJ 26“ | 100 mm Travel | 100 x 15 mm Axle | Offset 40 mm Solo Air, adjustable Compression and Rebound Crankset SRAM DESCENDANT 6K Crank Arm Length 165 mm | 30 T | DUB Headset ACROS AIX-326 High Cap | 2 Spacer 5 mm Stem SRAM DESCENDANT Length 40 mm | 35 mm Clamp | Rise 0° Handlebar SRAM DESCENDANT RISER BAR | Rise 25 mm | 7° Back Sweep | 5° Up Sweep Grips ODI Brake SRAM CODE R Rotor CENTERLINE Ø 160 mm Adjustable Reach Seatpost SDG PIVOTAL Ø 25.4 mm | Length 200 mm Saddle SDG APOLLO PIVOTAL Weight 11,10 KG / 24,47 LB