Block user


maffoon-claude steep1deep's video
Aug 5, 2018 at 19:26
Aug 5, 2018
I enjoyed that. Nice one!

Added 4 photos to FiveTen-Freeriders
May 26, 2018 at 22:07
May 26, 2018
May 26, 2018 at 22:06
May 26, 2018


Added 16 photos to Transition-Patrol-X01
May 26, 2018 at 21:51
May 26, 2018
May 26, 2018 at 21:48
May 26, 2018


Added 20 photos to Kona-Process-for-sale
Oct 25, 2017 at 3:05
Oct 25, 2017
Oct 25, 2017 at 2:54
Oct 25, 2017

Kona Process 153 Large

$1450 GBP
This bike has been my best yet and it is sad to sell it, but I will be moving abroad and need the money. I have upgraded quite a lot over the past two years, including the rear shock, seatpost, wheelset, brakes, chain rings, tyres, bars and pedals. Check out the spec list below. Usual scratches and marks found on the bike. Also rear of frame protected by inner tube wrapped around. Bike is ready to ride and have fun on! If you have any questions please just drop me a message. Specifications: FRAME MATERIAL: Kona 6061 Aluminum Butted 153mm Travel SIZES: L REAR SHOCK: RockShox Monarch Plus RC3 FORK: RockShox Pike RCT3 Solo Air 160mm QR15 Tapered CRANKARMS: SRAM S1000 CHAINRINGS: 22/36/Guard (UPGRADED to Raceface) B/B: SRAM Press Fit 92 (NEW) PEDALS: DMR Vault (UPGRADED) CHAIN: SRAM FREEWHEEL: SRAM XG1070 11-36t 10 spd F/D: SRAM X7 Direct Mount R/D: SRAM GX (UPGRADED) SHIFTERS: SRAM GX BRAKE CALIPERS: Shimano Zee (UPGRADED) FRONT BRAKE ROTOR: Shimano XT RT76 6-Bolt Disc Rotor 203mm (UPGRADED) REAR BRAKE ROTOR: Shimano XT RT76 6-Bolt Disc Rotor 180mm (UPGRADED) BRAKE LEVERS: Shimano Zee (UPGRADED) HEADSET: FSA Orbit 1.5 ZS No.57 HANDLEBAR: Burgtec Ride Wide Trail bar 780mm (UPGRADED) STEM: Kona 40m SEATPOST: Rockshox Stealth Reverb 150mm (UPGRADED) SEAT CLAMP: Hope Clamp GRIPS: ODI Ruffian MX (UPGRADED) BARENDS: Straitline Bar Caps Aluminium Green (UPGRADED) SADDLE: Charge Spoon (UPGRADED) MUDGUARD: Burgtec FRONT HUB: Hope Pro 4 (UPGRADED) REAR HUB: Hope Pro 4 142x12mm (UPGRADED) SPOKES: DT Swiss (UPGRADED) RIMS: Hope Enduro (UPGRADED) FRONT TIRE: Maxxis High Roller II 27.5x2.4" EXO 3C REAR TIRE: Maxxis High Roller II 27.5x2.3" TR 3C PAINT COLOR: Orange & Black

Added 1 photo to Kona-Process-153
Jul 15, 2017 at 6:05
Jul 15, 2017
0 comments – Add comment
Added 13 photos to Bike-bits-for-sell
Nov 21, 2016 at 3:30
Nov 21, 2016
Nov 21, 2016 at 3:03
Nov 21, 2016

DT Swiss FR 6.1D Hope Pro 2 Custom Build Fr wheel 26"

$60 GBP
DT Swiss FR 6.1D Rim - slight mark on sticker, as shown in photos. Hope Pro 2 Hub Gunsmoke. 110mm x 20mm Thru axle DT Swiss double butted spokes, with brass nipples. I'm selling my front wheel which was taken off my bike about 5 years ago, It was hardly used because I ended up selling the bike in parts and the wheel remained in my wardrobe. Its in great condition but will need some grease on the bearings as its just sat there for a good 5 years. I will also throw in a couple of inner tubes and a maxxis high roller tyre which still has some life left in it. If you have any questions, please message me. Thanks, Claude.

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2020. All rights reserved.
dv65 0.017433
Mobile Version of Website