reks

2018 Race Face NEXT R carbon handlebars: 35mm clamp, 780mm length (uncut), 35mm rise. Good condition, with some minor scuffs, cosmetic scratches in the clearcoat (pictured). These bars were used sparingly on a singlespeed hardtail for about six months. I recently parted out a bike and needed lower handlebars for my a new project.

Race Face NEXT R crankset (cinch) in 175mm length. Crankset includes 68/73mm Race Face BSA bottom bracket, 30mm alloy spindle, cinch lockring, new preload adjuster, and black crank arm boots. Chainring not included. Crankset was used sparingly for about 6 months. Buyer pays shipping.

2018 Performance Series 34 FLOAT 29 or 27.5+ GRIP fork, 140mm travel. This fork was used sparingly for approximately 6 months on a singlespeed hardtail and is in fantastic shape. Damper is the 3 position grip variety. Fork has fresh oil and foam rings, and is ready to roll. Stanchions are spotless, and the only sign of wear is a minor scratch on one of the lower decals. Buyer pays shipping. Offset: 51mm Steerer tube: 16.5 cm / 6.5" Tapered steerer Spacing: Boost, 15mm axle

2018 STEEL Kona Honzo ST frame with FSA Flowtron seatpost. This frame is in excellent condition, and was used sparingly for approximately 6 months. No notable nicks, scratches or dents. Can be built either geared or as a singlespeed - the dropouts slide horizontally and very firmly stay in place, unlike many other SS designs. This frame was built as a singlespeed, so there are no chain slap marks on the stays, and I protected the headtube from brake hose rub with tape. Included with this frame is an FSA Flowtron dropper seatpost (150mm travel) with remote, which is very similar in design to the Oneup. Also included is an FSA Orbit ZS headset, and the original 12x148 axle. This frame builds into a super fun bike! Please note, the saddle photographed is not included in the sale. Buyer pays shipping. Geometry can be found here: https://www.konaworld.com/honzo_st_frame.cfm