Block user


Added 1 photo to Buysell
Jun 9, 2019 at 4:40
Jun 9, 2019
0 comments – Add comment
Jun 9, 2019 at 4:36
Jun 9, 2019

Cannondale Jekyll 3

$480 GBP
Cannondale Jekyll 3 Frame 27.5 in size extra Large Tapered Headset and bottom bracket included the ultimate all rounder frame with travel of 160mm but knocked down to 95mm with the flick of a switch at the bars. Fox DYAD RT2 shock has recently been refurbished by Fox in November last year at a cost of £211 by the previous owner, including new bushes and seals, crown race, bolts, valve caps and hose guides. Included with the frame is the original owners manual, a used headset for spares if needed, bearing service tools, kit and instruction guides with full new replacement kit for the shock link assemblies. And also the original shock pump which is required for the dyad as it needs a greater pressure in that most pumps go up to, a chart is also included for setting the pressure in correlation to your weight. Condition is Used with very few scratches as it’s heli-taped, I should add it’s pulling off in some places but has done its job for the most part. tiny amount of foot rub on the right side of the rear triangle as pictured, aside from that in very good condition. Collection can be arranged to Halifax area but will be sent with express 48 if not possible if I’ve missed anything or extra info required just drop me a message Cheers, Sam

Jun 9, 2019 at 4:27
Jun 9, 2019

Kona Process 134

$420 GBP
Kona Process 134 2016 Frame size L Sad to see this for sale, it was the perfect bike in a lot of ways, loved by anyone that rides the thing and any review of the bike will agree with that. but after buying the bike new in 2017 and using for over a year and a half, I came to the realisation it was just too small for me for do any real distance so this forced me to find something else in an XL. I’m 6”3 so that’s hardly surprising. So fair to say that the frame has had a fair bit of use but used nowhere near as much as it should’ve. the bearings were in good condition when last ridden, I’ve always carried out my own strip downs checking all the bearings are running smoothly then rebuilt with fresh clean lubricant. has been sat for 6 months so might be a little dry when first ridden. some stone chips on the down tube are present and I have pictured but that’s about the worst of it, generally the paint work is in good condition Spec includes - Shimano press fit 92 bottom bracket included For 27.5 wheels 142 x 12mm qr rear axle Rockshox monarch rear shock Condition is Used with some foot rub pictured on the rear triangle, could be covered with tape. Collection can be arranged from Halifax area, but posted with express 48 at buyers cost Any extra info just drop me a message. Cheers, Sam

Added 16 photos to Buysell
Jun 9, 2019 at 4:07
Jun 9, 2019
Added 12 photos to Buysell
Feb 20, 2019 at 13:21
Feb 20, 2019
Feb 20, 2019 at 13:12
Feb 20, 2019

Kona Process 134 DL L

$1200 GBP
Kona Process 134 DL 2016 L in good mechanical condition, being regularly serviced and parts being replaced whenever it needed it. I’ve recently stripped and replaced all bearings so has tons of life left in it. The bike has been absolutely solid for me and haven’t had a single complaint since I bought it new for £3200 in 2016. It can handle almost any all mountain riding and is a breeze uphills. You only have to look some of the reviews up on these bikes to see how amazing people think they are. Spec list as follows Frame - Kona 6061 Aluminum Butted 134mm Travel Rear Shock - RockShox Monarch RL Fork - RockShox Pike RC Solo Air 140mm QR15 Tapered Rear Derailleur - Shimano XT 11-speed Shifters - Shimano XT 11-42t cassette Chain set - RaceFace Aeffect SL 32t Narrow/Wide Bottom Bracket - Shimano Press Fit 92 Chain - KMC X11 Brakeset - Shimano Deore 180mm (centerlock) Handlebars - Kona 35 Riser 780mm Stem - Kona XC/BC 35mm Headset - FSA Orbit 1.5 ZS SC Rims - WTB STs i29 TCS 27.5" Front Hub - Novatech 15mm Rear Hub - Novatech 142x12mm Front Tyre - Maxxis Minion 27.5x2.3" Rear Tyre - Maxxis Shorty 27.5x2.3" Saddle WTB - Volt Team / Volt Team 250 Seatpost - KS Lev Integra The spec is more or less stock, with only a few changes including a saint bash guard to protect the underside, an upgraded 203mm ice tech front rotor for the extra stopping power. I usually ride clips so these aren’t included however there are a pair of plastic tioga flat pedals with the bike. There is a reasonable amount of foot rub on the cranks and top rear swing arm as can be seen in the pictures. I should mention the brakes might need a bleed, I did buy a bleed kit but it seems to be missing a 7mm pipe to attach to the calliper so I haven’t managed. I will include the kit and 100mm of hydraulic oil. I think that’s everything, If I’ve missed anything or there’s any questions, don’t hesitate To ask. Thanks, Sam

Added 5 photos to 600D
May 4, 2016 at 12:17
May 4, 2016
May 4, 2016 at 12:12
May 4, 2016

Canon 600D DSLR good condition

$350 GBP
Hi, looking for a very quick sale on my canon 600D bundle with many accessories Includes : 28-80mm canon lens 50mm film camera lens with m42 conversion ring Extension battery pack for holding 2 battery's 3X spare battery's 2X spare memory cards (4gb+8gb) Neewer Macro/wide angle lens Battery pack charger Camera to usb cable Camera to TV cable Remote shutter release Also includes original box and all instruction manuals and starter DVD 
 The camera has been well looked after so is therefore in excellent condition Fast sale ideally, will consider offers Message me if I've missed anything. Thanks, Sam

Added 6 photos to Radio-griffin-build
Jan 10, 2016 at 9:49
Jan 10, 2016
Jan 10, 2016 at 9:41
Jan 10, 2016


Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. All rights reserved.
dv65 0.053394
Mobile Version of Website