tricky-dicky

For sale is my NS Fuzz DH Bike, I have owned for about 2 years now, selling due to lack of use, It is a bit rough around the edges but all in all a great bike, the suspension in particular is top of the range. The bike rides well, and would suit someone who is around 6ft or a few inches either side of. 2015 NS Fuzz Large Aluminium Frame - A few scuffs and scrapes but no cracks or major damage, see pictures for more detail. only really bad looking stuff is under the chain stay protector so is normally hidden. 2016 Fox 40 RC2 Kashima (No marks/scratches on stanchions) - Fully Serviced by J-Tech with new seals, o-rings, foam rings and oil. Fork has 5 x NA2 Volume spacers inside currently and is fitted with Andreani piston upgrade kit. 2016 Fox Float DHX2 with the orange SLS Spring Shimano Saint Brakes Front and Rear - Recently had a fresh bleed and had new Shimano 203mm rotors and Shimano pads fitted, Levers are a bit scratched but all works great. Hope Tech DH Rims on Orange Hope Pro 4 Hubs fitted with Continental Der Kaiser Projekt DH Tyres - Wheels are true and bearings good, tubeless. tyres haven't got a lot of life left to be honest. Shimano Zee Groupset - Shifter, Derailleur, Crankset - All fine, expected wear to crank arms. 800mm Burgtec Ride Wide DH Carbon Bars - scuffed SDG I-Beam saddle and seat post, NS own brand direct mount stem. Hope headset. Burgtec Pedals Any questions about anything please don't hesitate to ask, if you want more pictures of anything in particular or you want to come have a look at the bike just let me know. Thanks, Rich

Halo Chaos 27.5"/650B Wheelset. This ad is for the wheels, brake discs, tyres and tubeless valves. Really good condition wheelset, had very little use, good looking and from a brand known for strong and sturdy wheels. 32H non-boost wheels currently set up with 15mm thru-axle but I have a variety of adapters available that I will throw in and these are cheap to buy yourself Set up tubeless using some very fancy E13 Valves and equipped with WTB Convict 2.5" tyres front and rear - tough casing high grip version on the front and tough casing fast rolling on the rear, loads of life left in these. Fitted with 180mm Uberbike radiator fin rotors, maybe not to everyone's taste but they're also pretty new and in really good shape. These were fitted to the hardtail and forks that I am also selling so please check them out, they did all go together really nicely and if you were interested in multiple items that I'm selling we could come to a deal. Thanks for looking.

Manitou Mattoc Pro 2 Forks 160mm Travel, 650B/27.5" Forks in a lovely bright red colour with black stanchions. 1.1/8" - 1.5" Tapered steerer - approx 180mm long. Forks are 15mm x 100mm thru axle using an Allen key. Forks feature externally adjustable low and high speed damping/rebound and have been fitted with the Manitou IRT upgrade kit which means that you can adjust the Forks progression by way of adjusting pressure in a second air chamber instead of taking the fork apart to add/remove volume spacers. Although these Forks are at 160mm at the moment they can be internally adjusted to 150mm or 140mm also. I will provide the buyer with the specialist tools and travel spacers to do this. Brake mount is 74mm post mount. Also included with these Forks are a bunch of spare stickers/decals and a brand new mudguard to suit the signature Manitou reverse crown. Forks are in outstanding condition with no scuffs/scrapes to speak of. Thanks for looking. P.S please see my other for sale items

DMR Trailstar 2017 Frame - Large - Throwback Blue - 27.5"/650B This advert is for the frame, 142 x 12mm dropouts and 12mm thru axle. Heat treated 4130 chromo steel frame that has been treated with J.P Weigl's frame saver throughout ownership to prevent rust. Frame has a Tapered Headtube, ISCG05 Mounts and Stealth dropper routing. I have owned the bike from new for just over a year now but it has hardly been ridden, frame is in great condition and buyer will not be disappointed. There is some cable rub on the head tube unfortunately but the only real marks are the paint chips down on the chainstay, if you run a chainstay protector however these are not visible during normal use. Frame is recommended for use with 140/150mm forks and is a blast to ride its slack and low geometry with a short rear end and a super low stand over just make it fun. Frame is pretty heavy at 2.8Kg but it's never really bothered me and that's the price you pay I guess for going steel, which is noticeably more forgiving than Ali hardtails that I've had before this. Useful info for anyone looking to build it up: Frame takes an integrated tapered headset with a 42mm upper and 52mm lower bearing. e.g Cane creek 40 series or FSA No.42 Frame is compatible with normal 650B wheels, it can take plus size tyres up to 2.8" tyres but to do this you need the +8mm dropouts from DMR part number: DMR-SW-V4-142-PLUS8 Threaded 73mm Bottom Bracket Shell Seat post size 31.6mm Seat clamp size 34.9mm Thanks for looking. P.S check out my other for sale items.