voltagelmtd

A great touring fork with mounts for bikepacking/touring gear, internal routing for dynamo hub, steerer tube has been cut to a little over 8 inches, Cane Creek race installed, new compression plug. Gently used for two seasons. Has some cosmetic blemishes shown in photos, but is structurally solid. Selling to clear out room in the garage. Brake Mount (Fork): Post Mount 160 Wheel Size: 27.5+ , 29" , 29+ , 700c Crown Race: 40 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 51 Material: Carbon Maximum Tire Clearance (Fork): 3" S.H.I.S. Stem Clamp Diameter: 28.6 Axle to Crown Length: 483

I have an excellent condition and lightly ridden 2023 Pike Ultimate with Charger 3 damper and Buttercups. I got this fork on a trade and it was lightly ridden by the previous owner for a summer of riding. The fork has a single small scratch at the bottom air-side bottom lowers, but looks brand new otherwise. Stickers have been removed. It has 44mm offset and 180mm steerer tube, and comes with unused tokens, unused fender, and original packaging. I have the exact fork in silver that I love and have no need for a second.

For sale: XL Starling Factory Murmur with 140mm travel and 2x rear shocks. Bearings were replaced last summer and have had 3 rides on them. Comes with Cane Creek DB IL coil with 500 lb progressive spring and freshly rebuilt DVO Topaz air shock, both with appropriate hardware. Also included are an extra derailleur hanger, Cane Creek headset, and Salsa seatpost collar. Frame has multiple paint chips, a new rear triangle that has 1 season of riding on it, and a small dent in the downtube near the bottom bracket. I would still be riding this bike for years to come, but the frame size is slightly too big for me and what I want to use the bike for. This bike has been an absolute blast to ride and has been ridden hard as can be seen in the photos, but has been well maintained mechanically. The frame has some flex to it but it feels more springy than soft. It sticks to off camber sections and flat corners like glue but it will blast you out of tight corners and compressions if you load it. Buyer pays shipping.