Video player is disabled while the embed window is open.
Copy and paste the HTML code below:
Color:
Size: X
|
| |
convert coaster-brake hub to a freecoaster
from the folks at freecoaster.com....
25 Comments
- + 1
rutschattack
(Sep 25, 2008 at 19:57)
hey i did this and it works so well i used a washer and ther was a 1mm space between the washer and the sping heads and it work preety good it does have freecoaster on it and sometimes doesnt idk y but it also pedals half a crank wen walking the bike foward it does work fine and if u want ill show u a vid of it working just let me know
- + 1
i dint belive you guys when you said it was possible....but arnt any hubs with a coaster brake crap anyway?
- + 0
a way easier way of doin it is just takin off the bolt on the one side and then take off the brake arm n put the bolt back on
- + 1
Simply removing the brake arm doesn't allow free wheel ...
Even with washers, I found a ½ turn slack after back peddling.
Using a lock washer / spring washer I was able to get rid of it.
It takes some trial & error to get enough pinch to hold the bearing up tight and still have some roll in the axle, but I now have a cruiser that free wheels with no visible modifications.
Even with washers, I found a ½ turn slack after back peddling.
Using a lock washer / spring washer I was able to get rid of it.
It takes some trial & error to get enough pinch to hold the bearing up tight and still have some roll in the axle, but I now have a cruiser that free wheels with no visible modifications.