Video player is disabled while the embed window is open.
Copy and paste the HTML code below:
Color:
Size: X
|
| |
Hmmm
that loud noise is not me coasting, its something else.
17 Comments
- + 1
recklessness
(Jul 22, 2009 at 17:22)
What a weird f*cking noise. I assume your chain line is straight. I have never heard anything make that noise before (other than popcorn). I wish I could be more help, but I have no f*cking idea what that could be. I would very much like to know when you figure it out. How bizarre.
- + 1
Well I just checked, and its not off, and if it is, its off by am amount not traceable by the eye.
- + 1
Then that is the mystery noise. Unless the chain itself is just f*cked. What kind of chain is it?
Edit: I have had chain lines that took me a very long time to notice they were crooked.
Edit: I have had chain lines that took me a very long time to notice they were crooked.
- + 0
Maybe one of your tire's beads is f*cked completely. And when you roll it resets itself in the place which it is touching the ground, making that really weird noise. Just a guess though.
Edit: after watching it again, probably not...
Edit: after watching it again, probably not...
- + 1
What about something dumb like a bent sprocket or f*cked driver? It definitely didn't sound like a bearing issue.
- + 1
I have a slightly bent sprocket, but it really isn't that bad. The teeth are pretty fat on the MDS. The tips are like little squares. But my other chain ran flawlessly.
- + 1
1 chain got any lube on it? 1st guess your not a retard so it is
2 your chain plates are hitting the mds guard
3 your teeth have a slight over hang or mushrooming doubt full cause its heat treated but possible
4 your pawls are f*cked
5 not enough spring tension on the pawls so they are skipping around
6 bearing maybe
7 loose spokes ? maybe
can you spin it and its fine? or is it only once your coasting on the bike does it do it when your pedaling?
2 your chain plates are hitting the mds guard
3 your teeth have a slight over hang or mushrooming doubt full cause its heat treated but possible
4 your pawls are f*cked
5 not enough spring tension on the pawls so they are skipping around
6 bearing maybe
7 loose spokes ? maybe
can you spin it and its fine? or is it only once your coasting on the bike does it do it when your pedaling?