Powered by Outside

Follow Me To The Future

Mar 13, 2008
by Luc 'Acadian' Albert  
News Source: Eric Schutt
A revolution in transmission technology is coming, and its name is Truvativ HammerSchmidt. Powered by SRAM.Join the movement at magicmechanics.com


photo


Posted In:
Press Releases


Report
Must Read This Week

71 Comments
  • 151
 please be gear box, please be gearbox....
  • 10
 I don't get it why do people want gear boxes right now they are in early development stage they are hard to tune, maintenance is gonna be a bitch...
Its probably gonna be a DH/FR specific crankset like with integrated shaft like the Saint but they say its gonna be revolutionary so its gonna be better.

I hear so many people wanting gear boxes for their bike the truth is that right now they are heavy and big and compared to the the normal sistem which is lighter and far more reliable, and if they do want gear boxes why didn't people buy the GT-IT1??? or if you dont want to get a new bike get a Rohloff hub(14 speed)???

Geeez
  • 120
 Oh, I know. It's going to be a box to keep all your gear in. Ive totally been waiting for this technology, finally no more bags.
  • 10
 Ha gearbox, nice one. Well what does HammerSchmidt mean?
  • 70
 A short google search reveals that it seems to be a popular last name, hahahha
  • 00
 I believe it means "hammer smith", but my German isn't that good, so I might be wrong
  • 40
 as if your german needs to be very good to understand that:P
  • 20
 lol hahhaaa ^^^ majesticmoose gt owned!!
  • 10
 hammer smith, just a simple last name.
and as dant mentions, it could have hundreds of meanings but first of all it sounds like holzfeller or luftalarm. (stupid names in my opinion)
  • 10
 exactly, don't have any bike-y sound to it:P:P
  • 121
 transmission = Gearbox
SRAM = One that works
  • 20
 props on that one sir
  • 101
 ok.. but what is it?
  • 51
 Hopefully it will be a gearbox that you can attach to your bike. Ive never seen a vpp frame build around a gear box. In my opinion vpp is the future but the frame designs are compromised becasue of the drive, you have to adjust the design to allow for the difference in chain ring sizes, if you could design a gearbox to fit a standard bb that used a single ring at the rear, the designs of vpp could really be pushed forward. Goodbye Honda!!!!!
  • 01
 It is going to be ten speed cassettes and shifters. They had it at Interbike on display...
  • 10
 Why the hell we need a ten speed? I don't even like the 9 speed! I'm fine with the good ol' dependable 8 speed! 9 speed cahain is weak, I can only immagine how weak ten speed will be! More gears=more to go wrong!
  • 00
 dbox123: vpp is based around putting tension on the chain to reduce bob. how do you suppose that would affect a gearbox? compatible? not?
  • 00
 9 and 10 spd chains are the same size. The only difference between the two, is, they add an extra cog to the top of the cassette. Cassette makers don't have to change any of the cassette's spacing because there is enough room for the Derailleur and cassette, to still clear the spokes. The angle the spokes leave the hub make this possible.
  • 50
 Fall 2008?? Why not tell us what it is now so I can decide if I wana get it in Fall 2008... For F&$% sakes...
  • 20
 Righty, i read somewhere, afraid i can't find it again though, that it is basically a 2 speed gearbox chainset. The plan being that you can ditch the front mech and have better chain line and chain tension and build more crazy frame designs, still looking for the link...
  • 40
 While I'm sure it is going to be pretty cool, this seems like a lame way to announce it.
  • 00
 Its good marketing. It makes people want it even more being they dont even know what it is. All they know is that its something they need just because its something they want and need. Rofl!
  • 10
 Ok here is a scanned version of the article found on a german MTB forum:

farm4.static.flickr.com/3114/2330829703_8de1b755e6_b.jpg

The magazine also states that the name of the project is "hammerschmitt" (which is actually just another german version of the name Hammerschmidt...)
  • 00
 too bad i cant read german ha
  • 10
 I think Carnivorous is right, its a crank that works after the same principle as this one: http://www.youtube.com/watch?v=OZoXbfccW6U
Meaning that you will get two (or more?) gears ratios without the need of a front deraileur (the gearing happens inside the crank itself, they call it epicyclic gearing). I also read an article at a Norwegian website, where they claimed this design to avoid much of the movement in the suspension normally caused by pedalling, and that this "new" design (it's been known since the late 19th century) would cause a singlepivot renaissance.
  • 20
 2 speed internal bb.shift combo.
  • 20
 where the hell has murrays comment gone ????

i will put it up for him

is it a pair of cranks that dont fall off

truvativ deleted it but its true there crap go for race face or shimano
  • 84
 if Sram is doing it, then it'll get done right!
  • 35
 I beg to differ. They sure screwed up the Ruktion cranks. I have had two pairs of them that were machined wrong and fall off while you are riding.
  • 30
 Maybe you should avoid cheap cranks. I bet they also warrantied those cranks within a week. Sram is epic at righting any problems they encounter and doing it quick.
  • 10
 You chose to buy aluminum cranks mtbjunkie...
  • 00
 I stand by truvativ 100%, as I been riding the same two arms for three or four seasons now!
  • 00
 An internal geared disk hub? PLEASE...one that's not mucho $$$ like Rholoff(sp) but not weak like the Alfine. Pretty please. ohh and while i'm dreaming, some sort of chain tensioner that does not bolt to the BACK of the bike.
  • 10
 dmr and yess make them
  • 00
 yeh chain tensioners u can get bb mounted chain tensioners already.... this is guna be for dh bikes not street
  • 00
 It's a new transmission device that is located in the crank or to be more exact in the place where the chain ring usually sits! It's supposed to have 9 gears and is going to revolutionize the market if they do it right! the main Advantage is that pivot designs can now be designed in a whole different way! Usually pivot design are always a compromise due to the fact that rear suspesions have to work with different ring sizes, but since there will only be one ring ideal solutions designed around one ring size seem possible!
  • 10
 It's probably a crankset/BB set up that makes it simple to attach a gear box to your bike. There's been a few gear box's floating around that look great but there's no easy way to get them to work on your bike.
  • 00
 Hammer=Hammer
Schmidt=Smith
I want a schifter like on the old Bonanza bikes!!! so i can schift with my baaaalls while jumping..
There are some "fluid" , so without gear front transmissions in the American and European Patents, but they never worked well, too heavy, week etc. .. I say just be patient and keep up rippin with or without gears!!
  • 00
 If there are really going to be 9 gears inside the crank it'll make derailers a thing of the past all together...finally. I hate cassettes derailers and shifter. Im also excited for Sram doubletap MTB shifters
  • 00
 my guess would be some type of single ring crank with 3 internal gears which would eliminate the front derailer, because no matter how nice a front derailer is they still suck.
  • 00
 I wonder if this "HammerSchmidt" thing will be unveiled around the beginning of April? Seems like an excellent time of the year to release to and amazing advances in shifting technology.....
  • 23
 according to an article in a german MTB magazine 1 or 2 months ago SRAM is working on a gearbox for 2009....maybe HammerSchmidt (what a stupid name btw) could be that gearbox.....
  • 21
 I think it's a new type of shifter, electrical... like a new version of the airlines... just a guess =)
  • 00
 Matamahatta, they already sell a tensioner that connects to the bike like a chainguide. I imagine it's a gearbox, probably in hub form.
  • 10
 I remember a review of such a device a while back. And i've now looked at both the DMR (meh)and the YESS (very nice). If the YESS one pulls the chain up, thats sweet, because I seem to recall the reviewed one pushes the chain down, and I dont like that.

I hope, if it's a geared hub, it's not too pricey.
  • 00
 transmission could technically mean anything to do with your drivetrain. could be a sick pair of cranks to transmit the power to the wheels
  • 10
 i bet i can not afford it,could be cranks, or a derailer. maby a shaft drive
  • 00
 bolla is onto something here, even if its not the thing that truvativ are doin then its still a great design, i would probably buy one if it wasnt to pricy
  • 11
 It seems like a gear box of some sort..maybe you don't have to pedal to shift gears.
  • 00
 im pretty sure thats has already been done hasnt it?
  • 10
 no the idea is to have it so u can put it on any frame
  • 10
 deaner's last weekend WOOOOOOOO!!!
  • 00
 so appropriate ha ha ha!
  • 10
 gah meth3434 beat me to it.
  • 11
 belt drive to a g boxx is the future. lighter weight, no noise, no problems = fun
  • 00
 I think I get it. It's the same idea as a nexus internal but but set up in a planar fashion rather than horizontally.
  • 00
 isn't this already in testing? www.evil-bikes.com/structures_2013.htm
  • 00
 they arent talking about a frame designed for a gear box. People are speculating about something that fits on a normal frame. Right now all that works are frames made for them... which is a real downside.
  • 00
 i read the german one - i can read german.....it's meant to replace the front mech only and uses the iscg mounts......
  • 00
 Probably it is a hub, the I-motion version for MTB, like Rohloff, but lighter and cheaper.
  • 02
 yea but it says truvativ and dont they make things like cranks and not mechs? i hope its a gearbox but i would have thought it have sram's name on it.
  • 212
flag dkidd FL (Mar 13, 2008 at 10:05) (Below Threshold)
 ...and if it says truvative on it, it'll probably be shit. Dang.
  • 20
 gear boxes are usually mounted right above the crank though, maybe they had to make a special crank for it and decided to just make the whole thing truvativ....hopefully it won't be shit like dkidd said.
  • 00
 Hopfully it is a drive shaft into a internal hub. But who knows?
  • 00
 All a drive shaft would do is add a slew of stuff to maintain.
Below threshold threads are hidden







Copyright © 2000 - 2026. Pinkbike.com. All rights reserved.
dv56 0.018348
Mobile Version of Website