Block user

Recent

Demoguy mikekazimer's article
May 4, 2019 at 3:37
May 4, 2019
First Look: DT Swiss' New Ratchet EXP Hub Design
@SuperstarComponents: If you look at this photo https://www.pinkbike.com/photo/17160438/ you can see a spline on the inside of the threaded ratchet ring.
Demoguy mikelevy's article
Apr 8, 2019 at 15:04
Apr 8, 2019
Review: SRAM's New G2 Ultimate Brakes
@fluider: So you would've had conical washers on the 180mm as the postmount adaptor is tapered (bigger on one end) which makes the caliper not parallel with the 160mm post mount,
Demoguy mikelevy's article
Apr 8, 2019 at 4:03
Apr 8, 2019
Review: SRAM's New G2 Ultimate Brakes
@fluider: And what size was your disc rotor?
Demoguy raceface's article
Apr 6, 2019 at 23:19
Apr 6, 2019
Race Face Announces New Next SL Crankset
@adrennan: If you've got preload issues use this instead. https://www.canecreek.com/product/crank-preloader/
Demoguy mikekazimer's article
Apr 6, 2019 at 22:20
Apr 6, 2019
SRAM Announces New G2 Four Piston Brakes
@mnorris122: OK... More material around the caliper bolts refers to the bolts used to join the two caliper halves together. If your worried about marking your calipers while bolting them to your frame mounts, use a piece of tape either on the allen/torx key or a small piece on the caliper itself. Just be smart about, rather than bitching about it.
Demoguy mikelevy's article
Apr 6, 2019 at 22:00
Apr 6, 2019
Review: SRAM's New G2 Ultimate Brakes
If you've got 160mm post mounts using an adaptor for 180mm you do need conical washers to align the caliper to the bolt axis. Every brake does this!
Demoguy jamessmurthwaite's article
Mar 22, 2019 at 17:08
Mar 22, 2019
Demoguy StansNoTubes's article
Mar 18, 2019 at 14:19
Mar 18, 2019
Stan's NoTubes Announces New Flow EX3 Rims & Wheelsets
Anyone notice the spokes still swinging around after the rim had bounced back 0.50 ???
Demoguy mikelevy's article
Mar 9, 2019 at 14:48
Mar 9, 2019
Randoms: Hope's Updated Crankset, Mavic's New Carbon Wheels, Formula's Coil-Sprung Selva - Bike Connection Winter 2019
@Serpentras: Even if it gets loose the 16mm is just for the RF self extracting cap to remove the bolt, 8mm is still the only one holding the crankarm on. If it keeps coming loose, your probably not torquing it to the required 50nm.
Demoguy mikelevy's article
Mar 9, 2019 at 0:14
Mar 9, 2019
Vali Holl's New 29er DH Bike & Air Suspension
The article didn't mention larger NEGATIVE volume, just a more linear spring rate from a larger volume.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.043602
Mobile Version of Website