ElmnTfrliF

This is a brand new and unused MegNeg upgrade kit for RockShox Deluxe and Super Deluxe with 185-210 length and 47.5-55mm stroke. Asking $75 shipped.

This is a 2018 Fox Factory Float DPS configured as 200x51mm for the Santa Cruz Hightower v1. It comes with the 22x8mm OEM shock bushings. This shock was only used for a hand full of rides when my 2018 Hightower was new. I upgraded to a Float X2 shortly after. I kept this shock around as a backup, but it's no longer needed as my Hightower developed a crack and I have retired the frame.

This is a 2018 Fox Factory Float X2 configured as 200x51mm for the Santa Cruz Hightower v1. It has 22x8mm RWC needle bearing kit installed on both sides. Both bearings run smoothly and greatly decrease the breakaway force and stiction feeling on the rear suspension of the Hightower. You will notice that large numbers of new bikes are coming with bearing shock mounts for this very reason. The shock was serviced by Fox and the compression circuit was replaced in June 2020. The shock only has a hand full of rides on it since the service - as my Hightower frame developed a crack in the top tube. It performs even better than new after the service. The Float X2 is a massive upgrade in damping feel and control on the Hightower. The OEM Float DPS felt like a pogo stick by comparison. Also, a suspension expert can remove an internal spacer and increase the travel to 57mm for use in the Hightower LT.

2021 Santa Cruz Hightower C Frame Size Large. It is the 'Smoke Grey and Ivory' color. This frame is 100% new from the factory. It has never been built up or torn down. The frame has the upgraded Rockshox Super Deluxe Ultimate shock which comes on the CC model. The MegNeg kit can be had for an additional $60. (retail is $90) Will ship at the buyer's expense.