clarkson136

2018 YT Jeffsy 27.5 XL full skf pivot bearings. 2019 fox elite performance 36 & 2020 DPX2 both serviced and tuned by J-Tech with forks running Andreani piston kit. Scwalbe magic mary & big betty 2.4 addix soft compound. Rimpact inserts. DT swiss wheels and hubs. Hope BB. Raceface turbine cranks, bar & stem. Burgtec 32t chainring & headset spacers. Sram Guide RS brakes (new discs 200mm f&r new 3 months ago with kevlar pads). Sram GX 11sp drivetrain. Rockshox reverb with 1x leaver maintained by J-Tech. Burgtec axles front and rear ( this bike is running a custom CNC insert to allow the rear burgtec axel to fit the frame. Basically a new hanger bolt with the matching M12x1.75mm thread pitch ). Original is included with spare mech hanger. original fox axel to. Work components -1.5 degree headset ( if YT's number are correct along with the 160 fork this should be 64 degree head angle ) A very good capable bike that is ready to go. Its served me very well and I'll be sad to see it go but home renovations are taking over for now. DOES NOT COME WITH PEDALS. PRICE INCLUDES P&P.

For sale are my 2018 Pike RC 27.5 boost 46mm offset. The forks are from my current bike and have been maintained from new by J-Tech in Shropshire. They have had the 2020 debonair air spring installed taking travel to 160mm from stock 150mm, damper has been tuned to J-tech enduro specs and fitted with an andreani piston kit. In 2020 the CSU started to creak and this was replaced under warranty ( just, I was in by 2 weeks!) With 2021 CSU hence why there are no travel indicators on the stantions. Comes with burgtec axel. Steer tube is 208mm Payment via bank transfer Insured P&P £10 The rear photo of the forks isn't covered in little scratches its bits of fluff from the packaging.