espencer1

So, you want to build a sub-30lbs trail/enduro bike, huh? For that, you need to go back in time. Back to when frames were light, playful and tried to do it all. Before I parted it out, this bike weighed in at 28lbs in size XL. Oh, the other thing--you wanted your Boost 148 wheels to fit on a Pivot. Well, the impossible is still possible: 2016 Pivot Mach 6 - XL - Shock Included Condition: Used - Excellent - Low Miles Specs: -Size XL -27.5/650b front and back -155mm rear travel -148 boost rear axle spacing Additional Information: -Original owner -Low miles (approximately 2 seasons of riding total) - never ridden in wet -Carbon fiber has no cracks, paint in excellent condition -Includes installed upper and lower headset bearings, bottom bracket bearings and pivot bearings all with plenty of life left in them -Includes backup derailleur hanger -Includes working Fox Float X shock - shock is fully functional and holds air, however basic service at a bike shop is recommended for top performance. It has been serviced multiple times over the years This super clean frame is ready to be built up and ridden. Even as a 2016, Pivot included plenty of modern conveniences including internal cable routing with cable clamps, frame protection in critical areas, integrated ISCG mount and plenty of dropper insertion depth, all from the coveted pre-Superboost era. DW-link so you know it's a super efficient climber and has little to no pedal kickback. Please do not hesitate to contact me with any questions or make an offer

Intend Hover Shock - Gamechanger Generation -Near Mint Condition - Less than 1 season of riding (I'm original owner) -Standard Eyelet 230x60 or 230x65 (stroke adjustment spacer included) -LSC, LSR, Lockout, Separate +/- Chamber Tuning -Includes 2 volume spacers (large o-rings) -Eyelets set to 22.2x8mm top & 20.0x8mm bottom Please don't hesitate to ask any questions or make an offer