j-grabes

New bits: Fresh pads, rotors, chainring, chain, Switch Infinity link, grips, cables & housing, sealant, X2, seat post. Fox 170mm 38 Fox X2 Fox transfer 175mm Hope Tech e3s with 200mm rotors Hope Evo v2 crankset Hope Pro 4 hubs laced to Stan’s Flow EX3 rims Shimano XTR drivetrain. Cushcore Pro front and rear Ride wrapped with full coverage option spare hope bits will be included Selling to transition into hardtail life. Been bit by the single speed bug and looking to see what that world is about.

Pivot Switchblade with: Fox factory 36 and dpx2. Overhauled April this year. Lowers and air can serviced regularly. Fox factory transfer post @ 175mm. Hayes Dominion brakes, metal pads, 200mm/180mm rotors. will include extra pads. Dt Swiss xm1700 wheels. front and rear Maxxis assegai 29x2.5wt Exo+ tires. New front. Shimano XT/XTR drivetrain. Fresh chain. Truvativ Descendant carbon bars @ 780mm. Can swap for original Pivot bars @ 760mm if preferred. Bike is awesome! Just off a tune up and ready to rip! Will ship via bike flights or pickup in Utah/Jackson Hole.

First and foremost, this bike is priced as it is reflecting a carbon repair that was performed professionally in the summer of 2018. The downtube was cracked in shipping and I chose to have it repaired for peace of mind. Downtube is now stronger than it was before the crack. The rear wheel should be replaced or a new rim laced to the existing hub. It has hops and dents. The dropper post cartridge sticky in cold weather. The Thrushaft shock is starting to get air in the damper. Bike has a new chain, new chainring, new sealant, fresh fork seals & oil, 80% brake pads, and is in good ridable condition. If you don't mind the carbon repair, this bike will be a brilliant starter enduro, bike park, or trail bike. It has performed brilliantly for me these last few years and it's time to pass it on. Parts: Rockshox Lyrik RC2 Rockshox Thrushaft (basically a Deluxe RC) SRAM Code RSC's with 203mm&180mm rotors. metal pads SRAM GX drivetrain Truvativ Descendent Carbon bars. 760mm Deathgrips Bontrager Line30 wheels with high engagement upgrade (108poi) Boost hub spacing Bontrager 150mm Dropline dropper with WolfTooth lever Maxxis Minion 2.5WT EXO front tire Maxxis Minion 2.6 EXO+ rear tire will work with you on shipping price if needed. :)

Take offs since I went with a 1x setup. Ultegra 6700 crankset 50/34t with 9 and 10spd compatibility. 175mm crank length. Teeth show signs of wear from riding around the block a few times. No BB. Text, call, or message. Buyer pays shipping :)

Used Trek Mamba frame with a custom build. Size large frame. I am 6’ and would not recommend anyone taller ride this bike. With a short stem (can be included) it can fit down to someone 5’8”. Rockshox Reba RL fork at 100mm with QR dropouts. Shimano Deore brakes with 180mm rotors SRAM X9 shifter paired with X7 derailleur and 11-36 10spd cassette. Truvative Noir carbon cranks at 170mm with a RaceFace 34t narrow wide chainring and MRP chainguide Bontrager paradigm 29” rims paired to shimano deore hubs Kore OCD aluminum bars cut to 740mm Twice used 2.4” Bontrager SE4 team issue tires. Freshly setup tubeless with orange seal. I also have a set of 2.1” S-Works Fast Tracks I can sell cheap to make this a faster rolling bike. Fresh bleeds on both brakes. Drivetrains shifts well but will need anew chain at the end of the summer depending on usage. Fork will need seals and wipers soon. This bike has seen a life of single track trails in Park City and two loops of the White Rim in Canyonlands. It has been incredibly fun for me to ride, but it’s time to downsize and I’d love to see it go to a rider who will keep enjoying it as much as I have. (Front rim not ENVE - silly sticker that got put on)