jamesg

Kuat Ibex C1 Bed Rack. This variant is for most mid-size long-bed trucks with six-foot (ish) beds. This rack installs with either bed rails mounts or universal C-clamps. I am providing both kits with the rack. This bed rack has been excellent and is in near perfect condition. I am going a different direction with my build now, so time to sell it. To buy this in a shop you would spend $5800.00 after tax not including the labour to install it. I am selling the kit for $3800.00 CAD and I will help install it for you if you like. Prefer a local sale, I can help install it for you but I will ship if the buyer pays all freight related charges. Payment by e-transfer or PayPal (buyer pays fees) My configuration is unique and comes with the following accessories all in excellent condition (I will NOT break this up) - Ibex Bed Rack C1 for a 6’ (ish) bed - Full size Molle panels on both sides (newest version) - Crossbar Riser Kit with front Molle strengthening panel - Antenna or whip mount - Bottle opener - 2 Rotopax mounts with handles - 1 White Rotopax 2 gallon water container - 1 Red Rotopax 2 gallon fuel container - Extra T slot hardware - Diode Dynamics Scene lighting kit on both sides with all current wiring. Note: (the Maxtrax boards and mounts are not included in the sale) Note: (the DMOS shovel is not included in the sale) The rack fits a lot of trucks on the market, here is my list of confirmed fitments (not exhaustive, email me if you are unsure if this will work for your truck) Toyota Tacoma double-cab or access-cab, 2013 through 2026 (uses bed rail mounts) Tacoma, 2005 through 2012 (uses J clamps) Ford Ford Ranger SuperCrew, 2019 through 2026 (uses J clamps) Nissan Nissan Frontier Crew Cab, 2013 through 2026 (uses either bed rail mounts or J clamps) Chevy / GMC Chevy Colorado Crew Cab, 2015 through 2022 (may fit up to 2026, email me to confirm) (uses J clamps) GMC Canyon Crew Cab, 2015 through 2022 (may fit up to 2026, email me to confirm) (uses J clamps) Kuat Ibex specs: The Kuat Ibex C1 bed rack has a maximum static weight capacity of 1,200 lbs, a dynamic (on-road) weight capacity of 600 lbs, and an off-road dynamic capacity of 300 lbs. Constructed from lightweight aluminum, this adjustable rack is engineered for heavy-duty, overlanding, and general hauling. Stainless steel hardware, and compatible with many retractable tonneau covers (you would need to buy the adapter kit for this purpose).

Beautiful rare wheelset. Not much like this out there right now. Very tough strong wheels, perfectly true. WeAreOne Convergence Caron Fuse rims (33mm internal) 28h Chris King ISO Hubs (Matte Bourbon anodizing, limited production run colour) front and rear. 6 bolt discs and XD driver Laced with Black Berd UHWMPE spokes for a super light and comfy ride. These are a Dyneema fiber spoke, not a metal spoke. CushCore extralight inserts installed Maxxis Rekon 2.6 tan wall tires. Wheels are mint. Local pickup encouraged. Will accept PayPal (buyer pays fees) or e-transfer. Will ship, buyer pays freight charges.

Great condition 2024 Yeti ARC. I have this bike up for sale as a complete bike as well. Not much to say, very light, excellent geometry for a Squamish Hard Tail. designed around a 130mm fork. You can go up or down if you like, I used a 140mm fork and it felt excellent. UDH, comes with rear axle and seat collar. Seat Collar has a Titanium bolt. Frame is ride wrapped and short of a small scratch from a rock getting between the chainring and frame, is perfect. $2400 Local pickup preferred, will ship however buyer is responsible for freight. Accept PayPal (buyer pays fees), or e-transfer.

This is a late production model of the Trust Linage suspension fork. Trust was a company owned in part by Dave Weagle ( of DW link fame) to designed and built this fork to have virtually no dive characteristics when braking. Trust closed during the pandemic, a victim of bad timing. early 2020 fork. 130mm to 140mm of travel (it is a virtual # so it depends where you measure from.) Full Carbon construction. Serviceable internal damper assemblies. Comes with pump as shown in pictures. I use about 20lb less than my bodyweight for air pressure Fits a 27.5" or a 29" front wheel Comes with Cane Creek Expander Plug in Steerer tube. Steerer tube is 7" (180mm) long, plenty to fit most modern frames Climb lever (firm, med, open) Pictures show the air fill ports, and the adjustable compression capability. The red knob at the bottom lets you tune rebound Rides excellent. Was mounted to my Yeti, just moving on to a new project. Oh yeah, this fork is ride wrapped as well. Local pickup preferred, will ship at buyers expense. Cash preferred, will accept PayPal (buyer responsible for any fees associated) There are shops who will service this fork (suspension Syndicate in Salt Lake City is one), and I have the complete rebuild guide for you if you prefer to do your own work. Thanks for looking.

I built this bike up with lots of special bits to make truly rare and awesome Squamish Hardtail. Frame 2024 yeti ARC medium. Rhino colour, Ride Wrapped and in great shape. Fork Helm Mk2 fork, in great shape. User adjustable travel. I have the fork setup to 140mm, if you remove the travel reducing spacers, you will get 160mm. Wheels Tires Cushcore The jewel of the bike Seriously, not much like this out there right now. WeAreOne Fuse rims (33mm internal) 28h Laced with Berd UHWMPE spokes for a super light, very strong and comfy ride Chris King ISO Hubs (Matte Bourdon anodizing) front and rear. CushCore extralight inserts installed Maxxis Rekon 2.6 tan wall tires. Wheels are mint. Sram AXS Transmission drivetrain AXS XX transmission rear derailleur with remote Sram XX carbon cranks 170mm with 32t chainring and Sram bash guards complete with PF92 BB Sram XX Chain (full length chain) and Sram XX SL Cassette 10-52 The Rest OneUp Carbon Bar aluminum Stem and XL grips Cane Creek Hellbender headset, Sram Code RSC Brakes Sintered pads, 180mm 2 piece Sram rotors Aluminum One Up Pedals Reverb AXS dropper post (with black collar, unique, as these ship with silver collars, and remote. 175mm 31.6) Fabric Scoop Radius saddle Arundel Carbon Bottle Cage with a gloss weave Better Bolts Titanium hardware throughout. This is not a bike you will see duplicated anywhere else. Rides great, I am looking for the next project now. Will ship at buyers expense, prefer local pickup if possible. Cash or PayPal accepted. Buyer is responsible for any PayPal fees. Willing to accept reasonable offers. Thanks for looking.