Block user


jtforester mikekazimer's article
Oct 25, 2017 at 9:19
Oct 25, 2017
POC Joint VPD System Knee Pads - Review
Are these rated to any safety standard like some of the other (Leatt) pads?
jtforester mikekazimer's article
Aug 16, 2017 at 8:06
Aug 16, 2017
Added 3 photos to 2014-Giant-P-XC2-Wheelset
Feb 11, 2016 at 6:30
Feb 11, 2016
Added 6 photos to 2014-Giant-P-XC2-Wheelset
Aug 9, 2015 at 17:02
Aug 9, 2015
Aug 9, 2015 at 17:00
Aug 9, 2015

Brand New Giant P-XC2 Wheelset 15QR 142mm Rear

$180 USD
Hello PB, Will consider trade for Shimano 11spd drivetrain components. - XT deraulleur, cassette, shifter, chain. For sale is a brand new, never ridden set of 2014 Giant P-XC2 wheels with a 15mm QR front and a 142mm through axle rear. 6 bolt rotor pattern. Rims are taped and ready for tubeless tires. These came stock on the Giant Trance 27.5 1. The hubs are rebranded formula hubs, which are a pretty good value hub. Inside rim diameter is 19mm. 24 points of engagement (POE) based on me counting the freehub clicks. Please PM me with any questions. Thanks.

Aug 7, 2015 at 19:54
Aug 7, 2015
Aug 7, 2015 at 19:51
Aug 7, 2015

Industry Nine Enduro Hubs DT Swiss EX 5.1D All Axle Types

$400 USD
Hey PB, I'm selling/trading my beloved Industry Nine (I9) wheelset. These wheels have treated me well over the past few years but I no longer have a 26" bike so these have to go. I have many different hub configurations for these. Willing to trade for a 29er wheelset or a 29er Pike 140mm RCT3 fork. - Red Industry Nine Enduro Hubs - Currently set up as 15QR front and 142 x 12 rear. - Front hub has ceramic bearings and spins forever and ever. It's the best spinning wheel I've ever seen. - Red spokes with black spokes on either side of the valve hole. I have 4 extra red spokes. - DT Swiss EX 5.1D rims with tubeless conversion strips. - I've run them with tubes the past couple of years because I'm not patient enough to seal them up. Rims show normal wear for rims that are several years old but are still in good shape. The rear wheel is near perfectly true. The front wheel could use a little straightening. Buyer Pays Shipping and PayPal fees. Included Additional Axle Configurations. Front - 100 x 9 QR (or 9 mm thru axle) Front - 110 x 20mm QR Back - 135 x 10 thru axle with 135 x 10 DT Swiss RWS I will also include a rear hub rebuild kit (it's not needed at this point, though). Front tire has a Schwalbe Fat Albert 2.4 tire on it. It was tough to get off of the rim so I left it on. Feel free to PM me with any questions.

Added 4 photos to Fox-Float-34-CTD-Fit
Aug 6, 2015 at 18:41
Aug 6, 2015
Aug 6, 2015 at 12:30
Aug 6, 2015

Fox 34 Float 160mm FIT CTD Trail Adjust Kashima

$370 USD
Hi PBers, For sale is a lightly used Fox Float 34, Kashima coated with CTD Trail Adjust and is currently set at 160mm but can be set as low as 130mm or maybe 120mm with spacers. The steerer tube is very long at 8.5" and is long enough for an XL frame. It has a tapered steerer tube and a 15mm axle. Fork is in great condition with very clean stanctions and no to minimal marks on lowers. Pics will be uploaded soon. Can be ridden with 27.5 / 650B wheels as long as the tire isn't too big. I rode it with a 2.3 High Roller II without any rubbing or clearance issues. Shoot me an offer. Buyer pays actual shipping costs and PayPal fees. Thanks, John

Aug 2, 2015 at 8:32
Aug 2, 2015

Santa Cruz Blur LTc Carbon XL Low Miles

$1100 USD
Hello Everyone, For sale is my nearly new 2013 Santa Cruz Blur LT 2 carbon frame with DT Swiss 142mm RWS axle. Size is XL color is Matte Carbon/Silver White. The rear shock is a Fox CTD Kashima with Boost valve.The bike has very low miles on it. As you can see from the pictures, there is still shrink wrap on the drive side chainstay. I originally had this bike in a large and it was a little small so I bought the XL frame. I am the original owner. The XL doesn't fit me quite right either so I'm looking for a new rig. This post is for the frame, rear shock and rear axle. Actual shipping charges and PayPal fees will be added to the sale price. Frame will be shipped in original Santa Cruz box. I ran the bike for about 30-40 miles with 26" wheels and then switched to 27.5" wheels for about 30-40 miles without modifications. The slightly higher bottom bracket helps reduce pedal strikes and the bigger wheels roll over rocks and roots better. There's very little use on this frame. I built it up in August 2013 and became a father in October 2013. Other parts that I have that I could sell as a package are listed below I will also be posting ads for these parts separately: - Red Chris King headset - has about 60-80 miles on it. It was new with frame purchase. - 2013 Fox Float CTD Trail Adjust Kashima fork. Currently set at 160mm can be adjusted down with spacers. - $425 - Industry Nine (I9) Enduro 26" hubs laced to DT Swiss 5.1D rims. Also have 20mm and QR conversions for these hubs. Front hub has ceramic bearings and it spins forever. Also have freehub rebuild kit. - Giant PXC-2 27.5" wheels - Brand new never used. - Assortment of 26" and 27.5" tires. - XTR Bottom Bracket - New with bike Trade: I will consider trades for a small full suspension frame/bike for a woman about 5 ft. 4 in. Please respond through Pinkbike and I will get answer you quickly. Thanks!

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2018. All rights reserved.
dv56 0.054650
Mobile Version of Website