kostanev
- Member since Oct 25, 2006
- Male / 34
- Plovdiv , Bulgaria
- 42 Followers
- 0 Trailforks Points
Recent
kostanev seb-stott's article
Dec 2, 2023 at 15:44
Dec 2, 2023
Nerding Out: How Temperature Affects Your Suspension
I would say, what about bushing binding in lower temperatures. The increased slide resistance is much more affecting performance than air chamber, compression damping or tires.
kostanev edspratt's article
Sep 16, 2023 at 7:33
Sep 16, 2023
Devinci Global Racing Steps Away from Enduro World Cups
Fasten your belts UCI, it's a landing time.
Selling
Oct 14, 2022 at 2:28
Oct 14, 2022PUSH HC97 Hyper Charger Damper
$200 EURHello
For sale is brand new PUSH Industries HC97 Hyper Charger Damper.
Change the fork last minute and left with this one extra.
It's one of the best upgrades for Lyrik, Pike or Yari forks, that are equipped whit Charger dampers inside.
Makes the world difference in ride quality especially on small bumps sensitivity, fast large impacts and corner traction!
If is compatible with:
LYRIK: Compatible with all Lyrik RC, RCT3 and RC2 forks equipped with Charger 2 and 2.1 Damper cartridges
YARI: Compatible with all Yari forks that have been fitted with an upgraded RCT3 or RC2 Charger 2 or 2.1 Damper Cartridge. All up to model year 2022.
15x110mm Axle PIKE: Compatible only with 15x110mm Axle Spacing Pike forks equipped with Charger 2 and 2.1 Damper Cartridges
15x100mm Axle PIKE: Not Compatible!
Full info at:
https://www.pushindustries.com/products/hc-97
Features:
ELEVENSIX Compression Valve Technology for your fork
Pressure Balanced Symmetrical flow rate for increased traction and control
Provides smooth plush ride without being mushy
“Shim-Less” High Speed Compression Valve for seamless and smooth damping force in consecutive bumps providing a controlled and compliant ride
28 Clicks of external Low Speed Compression adjustment featuring a Parabolic Needle Shape for precise incremental adjustment range
28 Clicks of external High Speed Compression Damping featuring a fine resolution thread for precise incremental adjustment range
Includes Rebound shims for Revalve
LYRIK: Compatible with all Lyrik RC, RCT3 and RC2 forks equipped with Charger 2 and 2.1 Damper cartridges
YARI: Compatible with all Yari forks that have been fitted with an upgraded RCT3 or RC2 Charger 2 or 2.1 Damper Cartridge.
ZEB: Compatible with Select Plus and Ultimate Models
15x110mm Axle PIKE: Compatible only with 15x110mm Axle Spacing Pike forks equipped with Charger 2 and 2.1 Damper Cartridges
15x100mm Axle PIKE: Not Compatible! Click Here for more info: HC97 Support
Information regarding Fitment and Assembly Instructions found here: HC97 Support
YOUR ROCK SHOX CHARGER 2 OR 2.1 DAMPER COMPLETELY HYPER-CHARGED. EXPERIENCE BOTH PLUSH AND CONTROLLED.
PERFORMANCE REDEFINED
Manufactured and hand assembled in-house by the legendary
suspension technicians at PUSH Industries, the new HC97 Compression System
replaces the stock compression assemblies found in the popular Rock Shox PIKE,
Lyrik forks equipped with Charger 2 and 2.1 dampers. What does this
mean for riders? Increased traction and small bump sensitivity with higher
levels of stability and control all while giving riders more external fine-tuning
control over their front suspension.
PUSH engineers focused on creating a far more useable
adjustment range for riders looking to get the most out of their front
suspension performance. With an updated 28 clicks of low-speed compression
adjustment externally, riders will no longer find themselves hunting for a
setting “in between” clicks. Utilizing the parabolic low speed needle design, borrowed from ELEVENSIX, riders have a precise and consistent change
between each click. Additionally, the high-speed compression adjustment of the
new HC97 Compression System features a fine thread adjuster barrel also offering
28 clicks of precise resolution over the damping curve range.
SHIM-LESS DESIGN
Harshness has met its match! With traditional shimmed
compression valves, steel shims are bent upwards as fluid flows through the
valve. The more aggressive the impact, the more these shims need to bend in
order to allow the wheel to move through its travel. This shim bending is
progressive in nature resulting in an increase in damping force leading to
harshness on square edge impacts. Removing valving shims to help reduce
harshness at high speeds leads to an overall reduction in compression damping
and results in a decrease in low and mid speed control and performance.
The exclusive PUSH
“Shim-Less” Compression Valve design, also borrowed from the class leading ELEVENSIX
rear shock, eliminates this compromise. The progressive nature of shim bending is
replaced by using a precision machined sliding valve seat that can “dump” fluid
under the most aggressive square edge bumps. This resulting fluid flow allows
the wheel to compress more freely in aggressive terrain resulting in more
comfort and control through every stage of the fork travel.
DAMPING SYNCHRONIZED
Low and high speed compression, low and high-speed rebound,
mid valves, shims, bleed ports, needles, bladders…how does this all work? Well,
MTB dampers are a complex animal and when you hit a bump, the damper
experiences a very complex series of events. Having all the internal systems
synchronized optimizes the damper’s ability to respond and therefore directly
relates to the fork’s suppleness, control, and comfort when the trail gets the
most aggressive. With the HC97 from PUSH, our engineers first focused on improving
the communication between the internal systems ensuring proper balance at all
suspension velocities. Imbalance in these velocities is referred to as
“Hysteresis” in suspension terms and relates to the “delay” in the damper’s
response when changing from the compression to the rebound stroke. The HC97
provides key improvements in this area resulting in better bump sensitivity and
cornering traction.
PRECISION MANUFACTURED
Each HC97 component is precision manufactured under our roof here in Colorado by passionate people using state-of-the-art CNC manufacturing equipment and measuring systems. Our products are then assembled by skilled technicians, quality checked by meticulous eyes and hands and delivered to you, backed by the best customer service in the business
Price 200 euro.
Ships worldwide
Cheers and happy trails!
kostanev jamessmurthwaite's article
Mar 18, 2022 at 17:32
Mar 18, 2022
Manon Carpenter to Mentor Izabela Yankova on Gen S Team
Super happy that Izi is getting the properEST of attention and staff for her first contract. Years of hard work pays off! So grab her talent and determination and make a diamond! So, so happy!
Selling
Jul 26, 2021 at 1:35
Jul 26, 2021Nukeproof Mega Pro 275 size M
$1800 GBPFor sale is a Nukeproof Mega Pro 2018 275 size M full bike.
Parts:
Frame: Nukeproof Mega - all the bearing working smooth, a lot of paint chips, but no dents. Solid working frame.
Fork: 2021 RockShox Lyrik Ultimate - fresh full service and haven't ridden afterwards. 170mm travel 44mm offset, a long steer tube 19cm. Smooth and scratch free stanchions.
Shock: RockShox Super Deluxe RC3 - tuned from Vorsprung Suspensions whit Tractive tune for a range of 70kg to 80kg rider for a balanced traction and poppines. Fully serviced and haven't been ridden afterwards. A GnarDog token instaled.
Seatpost: RockShox Stelth B1 125mm travel fresh O-ring, oil and grease + fresh bleed. Haven't been ridden afterwards.
Wheelset: Hope Pro4 boost hubs laced on a Stans Flow MK3 front rim and DT Swiss E532 rear rim. Rear wheel was 2 rides old but hit a small rock under leafs and now there is a good dent, still strait and holds tubeless. Nukeproof ARD insert in the rear wheel. Hubs fresh serviced and haven't riden afterwards.
Brakes: Sram Guide RSC levers whit Code 2011 calipers for perfect modulation and power. Fresh metallic pads and fresh bleed. 200mm rotors.
Drivetrain: Sram GX cranks, cassette, shifter (brand new) and deraileur, XX1 gold chain. Still a lot of life left it it, cuz i'm more of a lift user than a pedal to the top guy. Cranks have a bit of a beating but only cosmetic, all fine. Bottom bracket running smooth.
Cock pit: Handlebar Nukeproof Horizon 750mm 38mm rise, Stem Nukeproof Neutron 45mm long, no rise.
STFU chainstay protector for less noise.
In additional you receive:
brand new bearing set + 2 Plus bearing additional
brand new spear rear mech hanger
original parts from the shock, that was changed in the tuning process.
and a set of pads: 1 brand new sram metallic, 1 slightly used sram metallic, 1 sram new sram organic, 1 new nukeproof organic and 1 slightly used Trickstuff Power organic
No pedals included!
Bike is well taken care of during the years. All the services was done way before the suggested hours of use, just to be sure everything is 100%.
At the moment bike is fresh from full service since it was prepared for races, but a lack of time after corona restrictions have been lifted, have to work much more and no time for ride this year.
You don't need to invest everything in it, I already done that. Just need a good amount of ride.
The bike is in Bulgaria, shipping worldwide.
Buyer pays taxes, fees and shipping.
If you need additional info or pictures, please let me know.
Best Regars
Stoyan
Selling
May 26, 2020 at 14:01
May 26, 2020