sarahlukas

Brand New - In Box - Never Used Retails for $280.00 Asking: $175 CAD LOCAL PICK UP in Squamish only. Pick up downtown at Squamish Library. (Lever NOT included - sold separately, linked below) FINISH: BLACK ANO WEIGHT: 350mm - 400g HEAD OFFSET:0mm DROP: 50mm LENGTH: 350mm/400mm QUILL SIZES: 27.2mm diameter MATERIAL: EA70 ALLOY From Easton: The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. https://eastoncycling.ca/products/ea70-ax-dropper-post?srsltid=AfmBOoqTsLqn6x_bB1dcJkapb6nxWfjq4tjyaY7oRBQJdZx-6Ydu7ooZ&variant=32491906498650 Lever - not included, sold separately: https://eastoncycling.ca/collections/components/products/ea90-ax-lever

This is a custom made wheel set from Light Bicycle, Falcon Pro 700c using their AR25 carbon rim and CX Ray spokes with DT Swiss 180 hubs at the center. I ordered these to be my ultra-light wheels and the set weighs only 1,056 grams! The front wheel weighs 487 grams, the rear weighs 569 grams. Ceramic bearings, an XDR freehub, and Center Lock rotor mount. I bought them in early 2024 and only rode them twice - they are essentially brand new. These wheels were $3,100 CAD when I bought them... I'd like $1,100 CAD. Local buyers only, no shipping, as I'd prefer to hand them to you in person. - AR25 Hybrid Hook UD carbon rims, sealed rim bed - 24 Spam CX Ray straight pull spokes - DT Swiss 180 hubs w/ ceramic bearings (12/100mm front, 12/142mm rear) - EXP 36 SRAM XDR freehub - Center Lock rotor mount (lock rings included)

Syncros Silverton SL Carbon 29" Wheelset These wheels are insane: 1,290 grams total weight and one-piece carbon fiber construction. The hub shells are carbon, as are the spokes and rims, and they're all molded together. These Silverton SL wheels have a 26mm internal width and a sealed rim bed, so there's no tape required. DT Swiss 190 hub internals, ceramic bearings, and an XD freehub. More info here: https://www.syncros.com/ca/en/product/syncros-silverton-sl-26mm-wheelset?article=2702290001715 You can literally buy speed with these wheels, they are so fast that you might be a gear higher everywhere. I put about twenty rides on them and then put them on a hook, which is where they've been hanging for the last few years. They're not new, of course, but they're in excellent condition. You can find Silverton SL wheel sets brand new for $4,600 USD... I'd like $1,200 CAD. Local buyers only, no shipping, because I'd rather you see them in person :) - One piece carbon fiber construction - 29" wheel size - 26mm internal width - Sealed rim bed, no tape needed - Carbon hub shells, one piece - DT Swiss 190 hub internals w/ ceramic bearings - SRAM XD freehub w/ ceramic bearings - Center Lock rotor mount (lock rings included) - 47mm aluminum valve stems included - 1,290 grams!

Used DT Swiss XR 1700 Spline wheelset. $25 or will trade for weed. Local pickup only - located in downtown Squamish. Comes with one rotor and one tire installed. Important to note: front hub end cap came off. Right now there is one that is a bit smaller and zip-tied to wheel. This works to fill the gap when installed, but someone may want to find a more permanent and safer solution. https://www.dtswiss.com/en/wheels/wheels-mtb/cross-country/xr-1700-spline From the website: If cross country means high speed after work rides and the occasional endurance race to you, then you should have a closer look at the XR 1700 SPLINE wheels. Light and welded cross country aluminium rims, relieable 36t RATCHET SL hubs and Swiss precision finish, from competition spokes to the signature DT swiss wheel build quality. A wheelset that is up to compete day in, day out, against yourself, your buddies or in a race. HUB TYPE - 350 with Ratchet System 36 SL RIM - Aluminum, Hooked / Crotchet tubeless TC INNER WIDTH - 25 mm SPOKES - DT competition® straight-pull AXLE SYSTEM - 12 mm Thru Axle BUILT-IN DIMENSION - 148 mm Boost

Used set of Bontrager Line Elite 30s, originally from my 2018 Trek Fuel 9.8. Small rider, only 130lbs. General cosmetic wear. Includes XD driver and 1x Hutchinson Toro (Tubeless Ready), and two short inserted valves (likely needing to be replaced). Does not include cassette or rotors. Rode these for a couple of years, mostly in Colorado. Upgraded wheelset when I moved to Squamish in 2020. LOCAL PICK UP ONLY - downtown Squamish Wheels are from here: https://www.trekbikes.com/ca/en_CA/bikes/mountain-bikes/trail-mountain-bikes/fuel-ex/fuel-ex-9-8-29/p/21611/ Material: alloy Intended use: trail, enduro Diameter: 29″ Rim width: 29/33mm, inner/outer Spoke count: 28 front/rear Spokes: 14/15G spokes, Alpina alloy nipples Hub: Bontrager Rapid Drive 108 Hub width: 110/148mm, front/rear Axle diameter: 15/12mm, front/rear Brake rotor interface: ISO 6-bolt disc Included: tubeless-ready rim strip, tubeless valve

Used SRAM Force 1 42t Carbon Crankset with DUB bottom bracket 170mm cranks Used for a season on my Stigmata gravel bike until I upgraded to Easton. **Missing self-extracting nut. Can purchase at any shop for about $15-$20.** Crankarm Length: 170mm BB Spindle Interface: DUB BB Compatibility: All SRAM DUB BBs Speeds: 12 Chainring Material: Aluminum BCD - 107 Technology SRAM X-SYNC 1x DUB bottom bracket X-RANGE https://www.sram.com/en/sram/models/fc-frc-1-d1