swillett116 dan-roberts's article
Sep 13, 2019 at 11:35Sep 13, 2019
Review: Ohlins’ TTX22M Coil Shock Delivers Grin-Inducing Performance
@NotNamed: That's actually not accurate at all. What you are referencing is a total reconfiguration for a different bike if you are swapping frames. A full rebuild for the 11.6 is $159 USD (143 euro, not 300-400) and that includes FREE re-valving if you're going for a different feel or want your two circuits set up differently. If you are reconfiguring the shock for a different bike, that's the only time it gets more expensive depending on what parts need to be replaced (body, bridge, shaft, etc). You then would have a freshly rebuilt, custom-tuned shock for your new bike, without paying for a whole new shock.
Added 3 photos to Buysell
Sep 7, 2019 at 13:00Sep 7, 2019
Sep 7, 2019 at 12:58Sep 7, 2019
Hi all! Ended up going back to a 29er so am selling this rad machine! Definitely one of the most playful, jibbiest bikes I’ve ever had and has plenty of stability for rowdy descents. I bumped the fork travel to 150 and it has zero effect on climbing performance but definitely a bit more forgiving on the downs. This was a custom frame up build. Parts are as listed: **note - bars and drivetrain are not as pictured, please refer to spec notes below** Frame: matte black/silver MEDIUM Santa Cruz 5010 V3 (the newly designed one) Fork: Boost 2019 Fox Factory 150mm Fit4 damper with custom decals Stem: purple Industry Nine A35, 40mm length Shock: Fox Factory 2019 DPX2 with custom decals Headset: Chris King Dropset in matte slate BB: RaceFace Cinch standard threaded Handlebars: RaceFace Next R, 35mm clamp, 35mm rise, trimmed to 760mm Brakes: Purple Hope X2s with fresh bleed Dropper lever: Paul Components remote, super light action Drivetrain: 11spd Shimano XTR w/RaceFace 170mm Cinch cranks and 30t chainring Dropper post: Fox Factory 150mm Transfer Rims: Carbon NOBL TR38 32h Hubs: Boost Industry Nine Torch, purple
Added 7 photos to sb6
Oct 31, 2017 at 18:12Oct 31, 2017
Oct 31, 2017 at 18:11Oct 31, 2017
Ridden three times. No scratches. Steerer cut to 7". Aftermarket decals.
Oct 31, 2017 at 18:04Oct 31, 2017
2017 Yeti SB6c Turq frame for sale. Didn't get to race as planned this summer and the frame has only been ridden three times. Small nick on top tube from another bike leaning on it. Comes with Chris King headset upgrade and gxp BB.