theden

Selling my RockShox Yari upgraded with a Charger 2 damper — same internals and performance as a Lyrik RC2, just slightly heavier crown casting. The fork is in great shape — stanchions clean, no deep scratches, seals good. Bought it as a spare while waiting for my Zeb, so it barely saw use. Details: > Travel: 150 mm > Wheel size: 27.5” > Damper: Charger 2 (independent HSC/LSC + rebound) > Axle: 15x110 Boost > Stanchions: 35 mm > Steerer: Tapered, approx. 215mm Condition: Very good — smooth action, no damage Maxle included Performs like a Lyrik RC2 but for a fraction of the price — great for trail or enduro setups. Located in downtown Calgary SW — local pickup available.

ANVL Mandrel Alloy Handlebar – 35mm Clamp, 30mm Rise, 800mm Width (New Takeoff) Brand-new ANVL Mandrel Alloy bar taken off my 2025 Transition Spire. Never ridden, never cut — straight from the factory build. Specs: > Material: 7050 Alloy > Clamp: 35mm > Rise: 30mm > Width: 800mm (uncut) > Backsweep: 8° > Upsweep: 5° > Color: Black Condition: New takeoff — no marks, uncut, ready to mount. Located in downtown Calgary SW — local pickup available.

Selling my OneUp Carbon Handlebar (35mm clamp, 20mm rise), trimmed to 760mm. In great condition — a few small cosmetic marks from normal use, but nothing structural. It’s an incredibly comfortable and compliant bar, great for trail or enduro bikes. Only selling because I switched to a 50mm rise version — otherwise, I’d keep it. Specs: > Material: Carbon > Clamp: 35mm > Rise: 20mm > Width: 760mm (cut from 800mm) > Backsweep: 8° > Upsweep: 5° > Color: Black Condition: Light wear, no cracks or damage — just a few surface marks. Price: Firm — it’s a great bar and always useful to have as a backup. Located in downtown Calgary SW — local pickup available.

Selling my RockShox Yari upgraded with a Charger 2 damper — same internals and performance as a Lyrik RC2, just slightly heavier crown casting. The fork is in great shape — stanchions clean, no deep scratches, seals good. Bought it as a spare while waiting for my Zeb, so it barely saw use. Details: > Travel: 150 mm > Wheel size: 27.5” > Damper: Charger 2 (independent HSC/LSC + rebound) > Axle: 15x110 Boost > Stanchions: 35 mm > Steerer: Tapered, approx. 215mm Condition: Very good — smooth action, no damage Maxle included Performs like a Lyrik RC2 but for a fraction of the price — great for trail or enduro setups. Located in downtown Calgary SW — local pickup available.

Selling my legendary PUSH ElevenSix V1, freshly serviced by SuspensionWerx at the start a season. Used on my 2016 Devinci Troy — super plush, supportive ride feel. Didn’t get much use this season (rainy summer + work + new bike). Would keep it, but rebuilding to trunnion mount is a costly move. If it doesn’t sell, my kid’s getting it someday Specs: > Eye-to-eye: 200 mm (7.875”) > Stroke: 50 mm (2.0”) > Spring: PUSH 600 lb (+ two lighter springs available) > SN: 11.602128 Can be re-tuned or rebuilt for different frames by PUSH or SuspensionWerx Condition: Excellent mechanically — minimal use since rebuild. Price reflects that it may need its next service next season (ideal time to have it tuned to your bike and weight). Located in downtown Calgary SW — local pickup available.

Selling my Marzocchi Bomber CR, custom-built and tuned by Mike at Evolution Suspension. Originally a 200x57mm, converted to 200x50mm with an internal spacer. Bought new as a backup while my Push 11.6 was being serviced — barely used since. Work done by Evolution Suspension: >Converted from 200x57 → 200x50mm > Full teardown and inspection > All available seals replaced > Fluid Focus bumper installed > Base valve wave washer upgrade > Vacuum bleed damper with Red Line synthetic 46 cSt oil > Nitrogen charge IFP Comes with Fox 650x2.30 spring (for big 100kg boi) Runs flawlessly, super smooth and predictable. Mike can re-tune it for your frame or riding style if needed. Condition: Excellent — minimal use, no leaks or damage. Specs: > Eye-to-eye: 200mm (7.875”) > Stroke: 50mm (2.0”) > Spring: Fox 650x2.30 steel coil > Hardware not included (standard 8mm eyelets) Located in downtown Calgary SW — local pickup available.