theo457

I am selling my 2014 Canyon Strive AL 8.0 as I am getting a DH rig. I have only had the bike for around 13 months but haven't had time to really use it until last September and have loved riding the bike on everything from xc rides as well as DH tracks, its managed to cope with everything with ease. No dents or cracks, just some general rub/ wear and tear, there are marked decals on the forks caused whilst transporting which have no effect on the forks- all of this is shown in the pictures. Spec is original as shown below and everything is running as smooth as when I got it. Spec: Frame type: Canyon Strive AL Fork type: Fox 34 Talus FIT CTD Performance (travel adjust 160-130mm) Shock type: Fox Float CTD Performance BV (160mm) Rims type: Sun Ringle Charger Expert Hub front: Sun Ringle Charger Expert Hub rear: Sun Ringle Charger Expert Tyres: Maxxis Minion DHF EXO 2.5 / Ardent EXO 2.4 Front derailleur: Shimano Deore XT Rear derailleur: Shimano Deore XT Shadow + Crankset: e.thirteen TRS Double Crank 36/22 Cassette: Shimano Deore XT 11-36 10-Speed Chain Guide: e.thirteen LG1 Dual Roller Guide + Takko Seat post: RockShox RS Reverb Stealth Saddle: SDG Circuit Handlebars: Race Face Turbine Stem: Race Face Turbine Basic Headset: Cane Creek 40 Brakes: Avid Elixir 7 Trail Shifter: Shimano Deore XT 10-Speed

I am selling a spare wheel that I have as I no longer has use of it. its from a Gt Avalanche 3.0 and has a quando hub laced to a jalco rim. Its a 26" wheel which is diasc and rim brake compatible and has a standard 9mm quick release. It also comes with a Tioga Extreme xc 2.1" tyre however this is worn down the centre. I am looking for £20 but am open to offers and postage will be on top if needed. It runs fine but has a very small buckle which I am unable to get out due to limited ability at wheel truing. If you need anymore information please send me a message.

I am selling my Boardman alloy stem that is 90mm long and has a 31.8mm clamping diametre. Only selling at wanted a shorter one for myself. There are no cracks or dents and no scratches on it at all. I am looking for £10 but am open to offers and if you want them posted this will be on top of the price. I am also selling the matching handlebar if you are interested. If you have any question just send me a message.

I am selling my Boardman alloy handlebars that are 640mm wide and have a 31.8mm clamp diameter. Only selling at wanted a wider set for myself. There are no cracks or dents just one scratch on them near the centre and some scuffs from where the stem and grips haves clamped on, all of this is shown in the photos. I am looking for £15 but am open to offers and if you want them posted this will be on top of the price. I am also selling the matching stem if you are interested. If you have any question just send me a message.