Pinkbike.com
Powered by Outside
Video player is disabled while the embed window is open.
Copy and paste the HTML code below:
Color:
Size: X
|
| |
HELP! whats happened to my tensioner!
i was rolling out of a 180 going fast and my tensioner went out of position and now its all floppy. HELP!
1,152
Views
15
Comments
2
Favs
Video info
- Date Posted
- Jul 4, 2008 at 11:42Jul 4, 2008
- Category
- Tips/HowTos
- Location
-
London, Ontario, Canada
12 Comments
- + 1
d-watson
(Jul 4, 2008 at 23:34)
theres a little knob on the end of the tensioner that should be held in place by your drop out thing, that way the spring can work... other then that i dont have a clue what it could be(i have the same tensioner)and the same gloves...
- + 0
i have a sillilar one and what i did is instead off pushing down i made it to push up. well i had to do because the derraileur hanger was striped and the screw was no longer holding on. so yea try my way. i also zip tied it. works great. never comes loose! give me your email. ill send you some pics of mine! hope it helps!
- - 1
just fuckin tighten the allen key at the end of the tensioner! dude that is all u have to do like push it to where u want it and tighten up dood! good luck and hope this helped
- + 0
no not even close thats retarted. i fixed it a while ago. the scew just holds it onto the derialler...theres a spring inside and it has a little end on it that sticks out and goes into a hole inside the tensioner which holds everything in place. the peice on the spring bent off so it would just spin around in place. so i re bent it back and it was fine but it jstu re broke again. so i took it off and had my chain just tensioned properly without it